From: Mannan Venkatesan (mv_lab@xxxxxxxxxxx)
Date: Sat Mar 16 2002 - 01:35:02 GMT-3
What IPX encapsultion have you configured? Try with 'sap'.
Mannan
----- Original Message -----
From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
To: <ccielab@groupstudy.com>
Sent: Friday, March 15, 2002 7:41 PM
Subject: ISDN Bridging
> I am bridging and running an OSPF demand circuit on an ISDN line, but I
> can't get the line to come up dynamically when I ping using IPX, which is
> being bridged. Otherwise it works fine, and if the ISDN line is up I can
> bridge accross it with an IPX ping, but only if the ISDN line was up from
> the ICMP specified in access list 101. I am using the following dialer
> list, ICMP as specified in the list brings the line up, but I can't get
the
> line to come up with an IPX ping. Do I have the right sap in acess list
> 200? Thanks.
>
>
> access-list 101 permit icmp host 2.5.2.5 host 1.8.1.1
> access-list 101 permit ospf any any
> !
> access-list 200 permit 0xE0E0 0x0101
> !
> dialer-list 1 protocol bridge list 200
> dialer-list 1 protocol ip list 101
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:10 GMT-3