From: Lupi, Guy (Guy.Lupi@xxxxxxxxxxxxx)
Date: Fri Mar 15 2002 - 21:41:30 GMT-3
I am bridging and running an OSPF demand circuit on an ISDN line, but I
can't get the line to come up dynamically when I ping using IPX, which is
being bridged. Otherwise it works fine, and if the ISDN line is up I can
bridge accross it with an IPX ping, but only if the ISDN line was up from
the ICMP specified in access list 101. I am using the following dialer
list, ICMP as specified in the list brings the line up, but I can't get the
line to come up with an IPX ping. Do I have the right sap in acess list
200? Thanks.
access-list 101 permit icmp host 2.5.2.5 host 1.8.1.1
access-list 101 permit ospf any any
!
access-list 200 permit 0xE0E0 0x0101
!
dialer-list 1 protocol bridge list 200
dialer-list 1 protocol ip list 101
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:10 GMT-3