From: Stephen Oliver (stevie_oliver@xxxxxxxxxxx)
Date: Wed Mar 13 2002 - 05:52:13 GMT-3
I have seen these port numbers referenced in connection with DLSW. I know
1981,1982 and 1983 are put in different queues if you use the priority
keyword with dlsw peers. However when I create the access-list the only
match listed with DLSW peers up is the line with 2065 in it.
I suppose we really need to know what the other ports are used for to really
understand what's needed.
Stephen.
>From: "Sean C." <Upp_and_Upp@hotmail.com>
>Reply-To: "Sean C." <Upp_and_Upp@hotmail.com>
>To: "Nicolai Gersbo Solling" <nicolai@cisco.com>, "CCIE Lab"
><ccielab@groupstudy.com>
>Subject: Re: Custom Q list
>Date: Tue, 12 Mar 2002 17:32:08 -0800
>
>Hi Nic,
>
>Hmmm..., I see how you're trying to grab dlsw first and put it into queue
>3.
>I've never tried it that way.
>
>I 've used this config from a commercial lab for dlsw and queueing and it
>has worked:
>
>queue-list 1 protocol ip 1 list 101
>queue-list 1 protocol ip 2
>queue-list 1 protocol ipx 3
>queue-list 1 queue 1 byte-count 2048
>queue-list 1 queue 2 byte-count 1024
>queue-list 1 queue 3 byte-count 1024
>
>acl 101 permit tcp any eq 2062 any
>acl 101 permit tcp any any eq 2065
>acl 101 permit tcp any any eq 2067
>acl 101 permit tcp any any eq 1981
>acl 101 permit tcp any any eq 1982
>acl 101 permit tcp any any eq 1983
>
>HTH,
>Sean
>
>----- Original Message -----
>From: "Nicolai Gersbo Solling" <nicolai@cisco.com>
>To: "CCIE Lab" <ccielab@groupstudy.com>
>Sent: Tuesday, March 12, 2002 9:51 AM
>Subject: Custom Q list
>
>
>Hi there!
>
>I have the followingf queue list configured:
>
>queue-list 1 protocol dlsw 3
>queue-list 1 protocol ip 1
>queue-list 1 protocol ipx 2
>queue-list 1 queue 1 byte-count 1150
>queue-list 1 queue 2 byte-count 2300
>queue-list 1 queue 3 byte-count 2296
>
>this is apllied to my serial 0:1 interface - I see the IP and IPX packets
>beeing put in the right queue, but the DLSW queue never get's used!
>
>My DLSW configuration is working fine , henci I have some windows 95
>machines broadcasting their netbios names on the network, which is beeing
>seen under DLSW reachability on the remote DLSW peer!
>
>Any ideas?
>
>
>Nic
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:03 GMT-3