From: Tu Nguyen (tunguyen@xxxxxxxxxxx)
Date: Tue Mar 12 2002 - 18:56:04 GMT-3
By-pass the startup-config, and erase the startup-config from the router
cli. Reboot the router as usual and this should fix it. This had happen
to me before in the past.
Tu
-----Original Message-----
From: Alexander Foster [mailto:afoster@cnr.edu]
Sent: Tuesday, March 12, 2002 12:45 PM
To: Lab Candidate; ccielab@groupstudy.com
Subject: RE: Routers stuck in boot
Change the IOS
-----Original Message-----
From: Lab Candidate [mailto:labccie@yahoo.com]
Sent: Tuesday, March 12, 2002 2:05 PM
To: ccielab@groupstudy.com
Subject: Routers stuck in boot
There's 3 routers that got stuck in boot up giving the following msgs:
00:00:05: %PA-2-UNDEFPA: Undefined Port Adaptor type 101 in bay 1
00:00:07: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up
00:00:07: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
00:00:07: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down
00:00:07: %LINK-3-UPDOWN: Interface Serial0/1, changed state to up
00:00:07: %SYS-5-CONFIG_I: Configured from memory by console
00:00:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0, chang ed state to up
00:00:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/1, chang ed state to down
00:00:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0,
changed sta te to down
00:00:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1,
changed sta te to down
00:00:09: %LINK-5-CHANGED: Interface Serial0/0, changed state to
administrativel y down
00:00:09: %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to
administr atively down
00:00:09: %LINK-5-CHANGED: Interface Serial0/1, changed state to
administrativel y down
00:00:10: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.2(5), RELEASE SOFTWARE
(fc1) Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Tue
11-Sep-01 22:18 by pwade
00:00:10: %SNMP-5-COLDSTART: SNMP agent on host r4 is undergoing a cold
start
After this, it just hang and won't respond to any key strokes, what
problems am I having? Thanks!
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:02 GMT-3