From: bravo (bravojun@xxxxxxxxxxx)
Date: Tue Mar 12 2002 - 02:57:32 GMT-3
Hello Guy!
I want to etherchannel betweeen 7204 and 6509.
Customer want to use both 7204's Fastethernet line with bridging.
I think that etherchannel is the best solution .
So I configed 7204 like that and I did not configed anything on 6509.
Is it right?
Is it need to config 6509?
Here is the 7204's configration.
But I don't know it is right...
7204===============6509
etherchannel
7204's config
interface Port-channel1
ip address 1.1.1.10 255.255.255.0
bridge-group 1
!
interface FashEthernet 0/0/0
no ip address
channel-group 1
interface FashEthernet 1/0/0
no ip address
channel-group 1
bridge 1 protocol ieee
[TABLE NOT SHOWN][IMAGE]
------------------------------------------------------------------------
"?l8. @NEM3], Daum" http://www.daum.net
[IMAGE]
[TABLE NOT SHOWN]
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:01 GMT-3