From: Frank Kim (frank@xxxxxxxxxxxxx)
Date: Tue Mar 12 2002 - 00:58:12 GMT-3
Jim, I thought about that too. The problem is it is a MUST to have
built-in dsu, so we have to attempt the 4 WIC-1DSU-T1.
-Frank
On Mon, 11 Mar 2002, Jim Newton wrote:
> What about using WIC-2Ts. You can then get 4 T1's without needing the
> net-mod. You just need to use smart serial cables instead. In theory this
> will work, but verify whether or not the 2601 will handle 4 T1s without
> overloading it.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Frank
> Kim
> Sent: Monday, March 11, 2002 9:22 PM
> To: ccielab@groupstudy.com
> Subject: OT: Cisco 2610 jamming with four WIC-1DSU-T1 modules?
>
> Hello folks,
> Has anyone successfully run four T1 on a 2610? If you do, I assume you
> would use a NM-2W module to add in the two additional WIC-1DSU-T1s? Also,
> do you need a specific IOS to handle it? Does it choke the cpu at
> all? Thanks for any input.
>
>
> -Frank
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:01 GMT-3