From: kym blair (kymblair@xxxxxxxxxxx)
Date: Tue Mar 12 2002 - 09:41:27 GMT-3
Frank,
I've used two WIC-2T in my 2620 and 2621 routers with no problems. Haven't
tried on a 2610 or 2611.
Kym
>From: Frank Kim <frank@comegetus.com>
>Reply-To: Frank Kim <frank@comegetus.com>
>To: Jim Newton <jnewton@InternetNOC.com>
>CC: ccielab@groupstudy.com
>Subject: RE: Cisco 2610 jamming with four WIC-1DSU-T1 modules?
>Date: Mon, 11 Mar 2002 19:58:12 -0800 (PST)
>
>Jim, I thought about that too. The problem is it is a MUST to have
>built-in dsu, so we have to attempt the 4 WIC-1DSU-T1.
>
>
>-Frank
>
>
>
>On Mon, 11 Mar 2002, Jim Newton wrote:
>
> > What about using WIC-2Ts. You can then get 4 T1's without needing the
> > net-mod. You just need to use smart serial cables instead. In theory
>this
> > will work, but verify whether or not the 2601 will handle 4 T1s without
> > overloading it.
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Frank
> > Kim
> > Sent: Monday, March 11, 2002 9:22 PM
> > To: ccielab@groupstudy.com
> > Subject: OT: Cisco 2610 jamming with four WIC-1DSU-T1 modules?
> >
> > Hello folks,
> > Has anyone successfully run four T1 on a 2610? If you do, I assume you
> > would use a NM-2W module to add in the two additional WIC-1DSU-T1s?
>Also,
> > do you need a specific IOS to handle it? Does it choke the cpu at
> > all? Thanks for any input.
> >
> >
> > -Frank
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:01 GMT-3