From: Carl Phelan (carlphelan@xxxxxxxxxxx)
Date: Mon Mar 11 2002 - 08:06:25 GMT-3
Hi All,
Probably a very basic question - excuse my ignorance! When you place
sc0 in a VLAN on a Cat 5000 which is attached to one router e.g.
Cat 5k.
Set int sc0 20 ip add 160.1.1.20 255.255.255.0
Set ip route 0.0.0.0 160.1.1.1
R1.
Int e0
Ip add 160.1.1.1 255.255.255.0
No sh
If R1 cannot see other routers' Ethernet addresses - how can the Cat5
when for example you are asked to ensure connectivity to all routers
from the Cat5? The VLANs exist on the cat5 say VLAN 10 = port 2/3 and
is 170.1.1.1.1 on e0 on R1 and so on but they cannot see the switch.
Must ip routing be configured in the network first when R1 can then see
all other addresses before the switch has full connectivity to all other
routers?
Many thanks
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:00 GMT-3