From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Mon Mar 11 2002 - 00:03:22 GMT-3
how about splite-horizon
-Mamoor
----- Original Message -----
From: ying chang <ying_c@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, March 09, 2002 11:04 PM
Subject: eigrp stub connected routes?
> This is my first time to setup eigrp stub connected by following the
example
> in Solie's book pp 710-712. My topology is quite simple, R1 is a
stub/spoke
> router and has connected network in 172.16.x.0/24, it connects to R2 via
> 192.168.1.0/24, R2 is a distribution/hub router, it has connected network
> 192.168.x.0/24. I have no problem to redistribute 192.168.x.0 to R1 via
> redistribute connected commands, but have trouble to see any connected
> routes coming from R1 via "eigrp stub connected" command. R2's "show ip
> eigrp nei detail" said "Stub Peer Advertising ( CONNECTED ) Routes", but
why
> they are not shown in "show ip eigrp topology" or "show ip route"?
>
> Config and output are at below.
>
> Thanks,
> Chang
>
> Topology:
>
> 172.16.x.0/24--R1(stub)--192.168.1.0 EIGRP--R2--192.168.[23].0
>
> Router 1:
> router eigrp 100
> network 192.168.1.0
> default-metric 1544 100 255 1 1500
> no auto-summary
> eigrp stub connected
> no eigrp log-neighbor-changes
> !
> -------------------------------------------------------
> Router2:
> !
> router eigrp 100
> redistribute connected metric 1544 100 255 1 1500
> network 192.168.1.0
> no auto-summary
> no eigrp log-neighbor-changes
> !
>
> --------------------------------------------------------
> Output see from R1 (stub router):
>
> Interfaces:
>
> Interface IP-Address OK? Method Status
> Prot
> ocol
> Ethernet0 172.168.1.1 YES manual up
> up
>
> Ethernet1 unassigned YES NVRAM administratively
down
> down
>
> Loopback0 172.168.2.1 YES manual up
> up
>
> Loopback1 172.168.3.1 YES manual up
> up
>
> Loopback2 172.168.4.1 YES manual up
> up
>
> Serial0 192.168.1.1 YES manual up
> up
>
> Serial1 unassigned YES NVRAM administratively
down
> down
>
> Routing table:
>
> 172.168.0.0/24 is subnetted, 4 subnets
> C 172.168.4.0 is directly connected, Loopback2
> C 172.168.1.0 is directly connected, Ethernet0
> C 172.168.2.0 is directly connected, Loopback0
> C 172.168.3.0 is directly connected, Loopback1
> C 192.168.1.0/24 is directly connected, Serial0
> D EX 192.168.2.0/24 [170/2195456] via 192.168.1.2, 00:00:07, Serial0
> D EX 192.168.3.0/24 [170/2195456] via 192.168.1.2, 00:00:07, Serial0
> r1#sh ip eigrp nei detail
> IP-EIGRP neighbors for process 100
> H Address Interface Hold Uptime SRTT RTO Q Seq
> Type
> (sec) (ms) Cnt Num
> 0 192.168.1.2 Se0 12 00:00:25 36 216 0 6
> Version 12.1/1.2, Retrans: 2, Retries: 0
> --------------------------------------------------------
> Output see from R2 (Distribution router)
>
> Interfaces:
>
> Interface IP-Address OK? Method Status
> Prot
> ocol
> Ethernet0 192.168.2.1 YES manual up
> up
>
> Ethernet1 192.168.3.1 YES manual up
> up
>
> Serial0 unassigned YES manual up
> up
>
> Serial1 192.168.1.2 YES manual up
> up
>
> Routing table:
> C 192.168.1.0/24 is directly connected, Serial1
> C 192.168.2.0/24 is directly connected, Ethernet0
> C 192.168.3.0/24 is directly connected, Ethernet1
> r2#sh ip eigrp nei detail
> IP-EIGRP neighbors for process 100
> H Address Interface Hold Uptime SRTT RTO Q Seq
> Type
> (sec) (ms) Cnt Num
> 0 192.168.1.1 Se1 12 00:02:00 1 3000 0 2
> Version 12.1/1.2, Retrans: 1, Retries: 0
> Stub Peer Advertising ( CONNECTED ) Routes
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:59 GMT-3