From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Sun Mar 10 2002 - 23:53:13 GMT-3
loopback interface is considered as stub network and is shown as /32 and
igrp dont understand host routes
so u need to over come process.
give a command on loppback "ip ospf network point-to-point"
-Mamoor
----- Original Message -----
From: <RSiddappa@NECBNS.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, March 09, 2002 6:06 PM
Subject: OSPF and Loop back.
> Hi
>
> some one help.
>
> I am trying to do a OSPF and IGRP stuff. here is the set up
>
>
>
>
>
> r1--------------------------r2----------------------------------------r3
>
> R1 in area 0 and ( OSPF)
>
> r1 and r2 in area 1 (/28) (OSPF)
>
> r2 and r3 runngin IGRP (/24)
>
> I am trying to make it work using the Loop back interafce command on R2.
>
> I ahve created a loop back interafce on r2 with maskl of / 28 and
> reditributed connetd in to OSPF ( ihave used the route map to mathc the
loop
> back interface)
>
> But I am not able to redistribute it properly I guess, thats the reason, I
> am not able to summrize it to / 24 address in the OSPF>
>
>
> any hinst pls.
>
> R.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:59 GMT-3