From: Jason Sinclair (sinclairj@xxxxxxxxxxxxxxx)
Date: Sun Mar 10 2002 - 20:38:59 GMT-3
Landon,
It is possible but not recommended. Cisco has stated that their
implementation of DLSW does not have the necessary support for routed
protocols (IP/IPX, etc). I have got this to work but it seems very flakey at
times. If you are looking to test you can use DSPU or NETBIOS workstations.
If you need configs for emulating PU2/PU4 devices on a router I can provide
these.
Regards,
Jason Sinclair
Manager, Network Support Group
POWERTEL
Ground Level, 55 Clarence Street,
SYDNEY NSW 2000
AUSTRALIA
office: + 61 2 8264 3820
mobile: + 61 416 105 858
* sinclairj@powertel.com.au
-----Original Message-----
From: Landon Fitts [mailto:l.fitts@mindspring.com]
Sent: Sunday, 10 March 2002 13:00
To: ccielab@groupstudy.com
Subject: IPX over DLSw
Does anyone know if it is possible to bridge IPX over DLSw
between
a remote Ethernet router and a remote Token Ring router?
I've have seen
a post a while back stating that it could be done with 2
remote Token Ring
routers using the "multiring ipx" command.
Regards,
Landon Fitts
NNCSE, NNCDE, CCNP, CCDP, CCIE Lab Candidate
l.fitts@mindspring.com
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:59 GMT-3