Frame Relay - Hub and Spokes

From: Carl Phelan (carlphelan@xxxxxxxxxxx)
Date: Sun Mar 10 2002 - 10:04:25 GMT-3

• Next message: C. Warren: "RE: Frame relay and split horizon"
• Previous message: Isianto Istiadi: "Frame relay and split horizon"
• Next in thread: Ludwig Morales: "Re: Frame Relay - Hub and Spokes"
• Maybe reply: Ludwig Morales: "Re: Frame Relay - Hub and Spokes"
• Maybe reply: C. Warren: "RE: Frame Relay - Hub and Spokes"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi All,

I have a basic problem in my current lab that I am working on. R3 is the
hub and R5 and R2 its spokes in a multipoint frame relay config. When
either R2 or R5 pings R3, the success rate is only 40% or sometimes 60%
and vice versa when R3 pings either of the spokes yet R5 can ping R2
100% with no dropouts and R2 pings R5 successfully also. With these
kind of ping dropouts, I cannot establish OSPF neighbors with R5 and R2.
I have checked the cabling - replaced even and ensured no duplicate
subnets.

Anyone any ideas?

Thanks,

Carl

• Next message: C. Warren: "RE: Frame relay and split horizon"
• Previous message: Isianto Istiadi: "Frame relay and split horizon"
• Next in thread: Ludwig Morales: "Re: Frame Relay - Hub and Spokes"
• Maybe reply: Ludwig Morales: "Re: Frame Relay - Hub and Spokes"
• Maybe reply: C. Warren: "RE: Frame Relay - Hub and Spokes"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:58 GMT-3