have 2 7204vxr with oc3 mmf i/f-anything else needed?

From: Nirav Kumar (nirav_sing@xxxxxxxxx)
Date: Sat Mar 09 2002 - 23:17:07 GMT-3

• Next message: Nirav Kumar: "atm pvc config using map-lst/map-group or using the pvc command?"
• Previous message: John Mistichelli: "RE: Appletalk"
• Next in thread: Przemyslaw Karwasiecki: "Re: have 2 7204vxr with oc3 mmf i/f-anything else needed?"
• Maybe reply: Przemyslaw Karwasiecki: "Re: have 2 7204vxr with oc3 mmf i/f-anything else needed?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
hi gang!

i have two 7206vxr routers each having oc3 links. can
anyone with experience of atm advise if
i need an atm switch for the cases highlighted below:

can anyone advise me if i could using these 2 routers
alone are sufficient to configure the foll:
* atm pvc -static mapping
*atm pvc-dynamic mapping
* atm svcs
* classical ip atm pvc
* classical ip atm svc

for each of the above cases do we need a switch ?

any help is appreciated .

rgds

Nirav Kumar

• Next message: Nirav Kumar: "atm pvc config using map-lst/map-group or using the pvc command?"
• Previous message: John Mistichelli: "RE: Appletalk"
• Next in thread: Przemyslaw Karwasiecki: "Re: have 2 7204vxr with oc3 mmf i/f-anything else needed?"
• Maybe reply: Przemyslaw Karwasiecki: "Re: have 2 7204vxr with oc3 mmf i/f-anything else needed?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:58 GMT-3