From: ying chang (ying_c@xxxxxxxxxxx)
Date: Sat Mar 09 2002 - 18:37:42 GMT-3
The problem is fixed by adding the network command and the redistribution
command. Quote from the great CD:
"The connected keyword will permit the EIGRP Stub Routing feature to send
connected routes. If the connected routes are not covered by a network
statement, it may be necessary to redistribute connected routes with the
redistribute connected command under the EIGRP process. This option is
enabled by default."
Don't we all love Cisco language? Thanks for the pointer!
Thanks,
Chang
>From: "C. Warren" <chwarren@cox.net>
>Reply-To: "C. Warren" <chwarren@cox.net>
>To: <ying_c@hotmail.com>, <ccielab@groupstudy.com>
>Subject: RE: eigrp stub connected routes?
>Date: Sat, 9 Mar 2002 13:48:43 -0600
>
>What Tom said....
>
>http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
>fipr_c/ipcprt2/1cfeigrp.htm#xtocid24
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> > Behalf Of tom cheung
> > Sent: Saturday, March 09, 2002 12:48 PM
> > To: ying_c@hotmail.com; ccielab@groupstudy.com
> > Subject: Re: eigrp stub connected routes?
> >
> >
> > I believe you should either add network 172.16.0.0 under r1's
> > eigrp process
> > or redistribute connected.
> >
> >
> > >From: "ying chang" <ying_c@hotmail.com>
> > >Reply-To: "ying chang" <ying_c@hotmail.com>
> > >To: ccielab@groupstudy.com
> > >Subject: eigrp stub connected routes?
> > >Date: Sat, 09 Mar 2002 13:04:24 -0500
> > >
> > >This is my first time to setup eigrp stub connected by following the
> > >example
> > >in Solie's book pp 710-712. My topology is quite simple, R1
> > is a stub/spoke
> > >router and has connected network in 172.16.x.0/24, it
> > connects to R2 via
> > >192.168.1.0/24, R2 is a distribution/hub router, it has
> > connected network
> > >192.168.x.0/24. I have no problem to redistribute
> > 192.168.x.0 to R1 via
> > >redistribute connected commands, but have trouble to see any
> > connected
> > >routes coming from R1 via "eigrp stub connected" command.
> > R2's "show ip
> > >eigrp nei detail" said "Stub Peer Advertising ( CONNECTED )
> > Routes", but
> > >why
> > >they are not shown in "show ip eigrp topology" or "show ip route"?
> > >
> > >Config and output are at below.
> > >
> > >Thanks,
> > >Chang
> > >
> > >Topology:
> > >
> > >172.16.x.0/24--R1(stub)--192.168.1.0 EIGRP--R2--192.168.[23].0
> > >
> > >Router 1:
> > >router eigrp 100
> > >network 192.168.1.0
> > >default-metric 1544 100 255 1 1500
> > >no auto-summary
> > >eigrp stub connected
> > >no eigrp log-neighbor-changes
> > >!
> > >-------------------------------------------------------
> > >Router2:
> > >!
> > >router eigrp 100
> > >redistribute connected metric 1544 100 255 1 1500
> > >network 192.168.1.0
> > >no auto-summary
> > >no eigrp log-neighbor-changes
> > >!
> > >
> > >--------------------------------------------------------
> > >Output see from R1 (stub router):
> > >
> > >Interfaces:
> > >
> > >Interface IP-Address OK? Method Status
> > >Prot
> > >ocol
> > >Ethernet0 172.168.1.1 YES manual up
> > >up
> > >
> > >Ethernet1 unassigned YES NVRAM
> > administratively down
> > >down
> > >
> > >Loopback0 172.168.2.1 YES manual up
> > >up
> > >
> > >Loopback1 172.168.3.1 YES manual up
> > >up
> > >
> > >Loopback2 172.168.4.1 YES manual up
> > >up
> > >
> > >Serial0 192.168.1.1 YES manual up
> > >up
> > >
> > >Serial1 unassigned YES NVRAM
> > administratively down
> > >down
> > >
> > >Routing table:
> > >
> > > 172.168.0.0/24 is subnetted, 4 subnets
> > >C 172.168.4.0 is directly connected, Loopback2
> > >C 172.168.1.0 is directly connected, Ethernet0
> > >C 172.168.2.0 is directly connected, Loopback0
> > >C 172.168.3.0 is directly connected, Loopback1
> > >C 192.168.1.0/24 is directly connected, Serial0
> > >D EX 192.168.2.0/24 [170/2195456] via 192.168.1.2, 00:00:07,
> > Serial0 D
> > >EX 192.168.3.0/24 [170/2195456] via 192.168.1.2, 00:00:07, Serial0
> > >r1#sh ip eigrp nei detail IP-EIGRP neighbors for process 100
> > >H Address Interface Hold Uptime SRTT
> > RTO Q Seq
> > >Type
> > > (sec) (ms)
> > Cnt Num
> > >0 192.168.1.2 Se0 12 00:00:25 36
> > 216 0 6
> > > Version 12.1/1.2, Retrans: 2, Retries: 0
> > >--------------------------------------------------------
> > >Output see from R2 (Distribution router)
> > >
> > >Interfaces:
> > >
> > >Interface IP-Address OK? Method Status
> > >Prot
> > >ocol
> > >Ethernet0 192.168.2.1 YES manual up
> > >up
> > >
> > >Ethernet1 192.168.3.1 YES manual up
> > >up
> > >
> > >Serial0 unassigned YES manual up
> > >up
> > >
> > >Serial1 192.168.1.2 YES manual up
> > >up
> > >
> > >Routing table:
> > >C 192.168.1.0/24 is directly connected, Serial1
> > >C 192.168.2.0/24 is directly connected, Ethernet0
> > >C 192.168.3.0/24 is directly connected, Ethernet1
> > >r2#sh ip eigrp nei detail
> > >IP-EIGRP neighbors for process 100
> > >H Address Interface Hold Uptime SRTT
> > RTO Q Seq
> > >Type
> > > (sec) (ms)
> > Cnt Num
> > >0 192.168.1.1 Se1 12 00:02:00 1
> > 3000 0 2
> > > Version 12.1/1.2, Retrans: 1, Retries: 0
> > > Stub Peer Advertising ( CONNECTED ) Routes
> > >
> > >
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:58 GMT-3