From: Roger Schotsal (schotsal@xxxxxxxxxxx)
Date: Fri Mar 08 2002 - 17:15:47 GMT-3
I have been using this syntax for mapping the remote end:
interface ATM1/1/0.200 multipoint
ip address 2.2.2.1 255.255.255.0
no ip directed-broadcast
pvc 2/200
inarp 5
protocol ip 2.2.2.2 broadcast
>From: "Williams, Glenn" <WILLIAMSG@PANASONIC.COM>
>Reply-To: "Williams, Glenn" <WILLIAMSG@PANASONIC.COM>
>To: "'Lupi, Guy'" <Guy.Lupi@eurekaggn.com>,
>"'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
>Subject: RE: ATM Interface Setup
>Date: Fri, 8 Mar 2002 10:52:17 -0500
>
>I had a problem similar. I put in the 16 0 16 ilmi and pvc
>ilmi-pcv-discovery and learned my PVCs by show atm pvc. Still could not
>get
>it to work when someone showed me I was set up for SVCs. Had to put in all
>that NSAP, ESi stuff. Darned if I know now how I could have determined it
>was SVC. Can someone tell me how?
>GW
>
>-----Original Message-----
>From: Lupi, Guy [mailto:Guy.Lupi@eurekaggn.com]
>Sent: Friday, March 08, 2002 9:20 AM
>To: 'ccielab@groupstudy.com'
>Subject: ATM Interface Setup
>
>
>I have some virtual rack time today, and it is my first time setting up
>ATM.
>I am following a book that I have to set it up, I can't get it to work, the
>interfaces are up but I can't ping the other side. There are 2 routers
>connected to an LS1010 ATM switch, I included the configs below, I would
>appreciate it if someone could tell me whether or not the configs are
>correct. The pvc for each router is 1, vpi 0 vci 32, thanks.
>
>hostname r9
>!
>!
>!
>!
>!
>!
>ip subnet-zero
>no ip finger
>!
>!
>!
>!
>!
>!
>!
>!
>interface ATM0/0
> no ip address
> no atm ilmi-keepalive
>!
>interface ATM0/0.1 multipoint
> ip address 6.9.6.9 255.255.255.0
> map-group tor6
> atm pvc 1 0 32 aal5snap
>!
>interface Ethernet1/0
> no ip address
> shutdown
>!
>interface Ethernet1/1
> no ip address
> shutdown
>!
>!
>ip classless
>ip http server
>!
>!
>map-list tor6
> ip 6.9.6.6 atm-vc 1 broadcast
>!
>!
>!
>!
>!
>!
>!
>!
>!
>!
>!
>line con 0
> logging synchronous
> transport input none
>line aux 0
>line vty 0 4
>!
>end
>
>r9#
>
>
>
>hostname r6
>!
>!
>!
>!
>!
>!
>ip subnet-zero
>no ip finger
>!
>!
>!
>!
>!
>!
>!
>!
>interface ATM0/0
> no ip address
> no atm ilmi-keepalive
>!
>interface ATM0/0.1 multipoint
> ip address 6.9.6.6 255.255.255.0
> map-group tor9
> atm pvc 1 0 32 aal5snap
>!
>interface Ethernet1/0
> no ip address
> shutdown
>!
>interface Serial1/0
> no ip address
> shutdown
>!
>!
>ip classless
>ip http server
>!
>!
>map-list tor9
> ip 6.9.6.9 atm-vc 1 broadcast
>!
>!
>!
>!
>!
>!
>!
>!
>!
>!
>!
>line con 0
> logging synchronous
> transport input none
>line aux 0
>line vty 0 4
>!
>end
>
>r6#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:57 GMT-3