From: Lupi, Guy (Guy.Lupi@xxxxxxxxxxxxx)
Date: Fri Mar 08 2002 - 13:24:41 GMT-3
Thanks to all who responded, they gave me the wrong pvc vpi and vci values.
They told me to use 0/32 and 0/32, when in acutality it is 0/100 and 0/101.
It is working now, thanks.
~-----Original Message-----
~From: Paul Lalonde [mailto:plalonde2@cogeco.ca]
~Sent: Friday, March 08, 2002 11:41 AM
~To: Lupi, Guy; ccielab@groupstudy.com
~Subject: Re: ATM Interface Setup
~
~
~Hi Guy,
~
~How about turning on PVC auto discovery? That way, you should
~be able to
~detect the PVCs configured on the ATM switch.
~
~I think its atm ilmi-autodiscovery under the physical interface.
~
~Hope this helps!
~Paul
~
~----- Original Message -----
~From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
~To: "'Paul Lalonde'" <plalonde2@cogeco.ca>; <ccielab@groupstudy.com>
~Sent: Friday, March 08, 2002 11:00 AM
~Subject: RE: ATM Interface Setup
~
~
~> I don't have access to the LS1010, so there is no way for me
~to verify the
~> setup unfortunately. It is on the IPExpert virtual rack.
~>
~> ~-----Original Message-----
~> ~From: Paul Lalonde [mailto:plalonde2@cogeco.ca]
~> ~Sent: Friday, March 08, 2002 11:16 AM
~> ~To: Lupi, Guy; ccielab@groupstudy.com
~> ~Subject: Re: ATM Interface Setup
~> ~
~> ~
~> ~Hi Guy,
~> ~
~> ~Can you forward us the PVC list on the ATM switch? Make sure
~> ~that the PVCs
~> ~that you've defined on the routers (0/32) is the same on the
~> ~ATM switch.
~> ~
~> ~Try a 'show atm pvc' or 'show atm map' on the LS1010. Also,
~check out:
~> ~
~> ~http://www.cisco.com/warp/public/121/ipoveratm.html
~> ~
~> ~and
~> ~
~> ~http://www.cisco.com/warp/public/121/index.shtm
~> ~
~> ~Hope this helps!
~> ~
~> ~Paul
~> ~
~> ~----- Original Message -----
~> ~From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
~> ~To: <ccielab@groupstudy.com>
~> ~Sent: Friday, March 08, 2002 10:20 AM
~> ~Subject: ATM Interface Setup
~> ~
~> ~
~> ~> I have some virtual rack time today, and it is my first time
~> ~setting up
~> ~ATM.
~> ~> I am following a book that I have to set it up, I can't get
~> ~it to work,
~> ~the
~> ~> interfaces are up but I can't ping the other side. There
~> ~are 2 routers
~> ~> connected to an LS1010 ATM switch, I included the configs
~> ~below, I would
~> ~> appreciate it if someone could tell me whether or not the
~configs are
~> ~> correct. The pvc for each router is 1, vpi 0 vci 32, thanks.
~> ~>
~> ~> hostname r9
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> ip subnet-zero
~> ~> no ip finger
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> interface ATM0/0
~> ~> no ip address
~> ~> no atm ilmi-keepalive
~> ~> !
~> ~> interface ATM0/0.1 multipoint
~> ~> ip address 6.9.6.9 255.255.255.0
~> ~> map-group tor6
~> ~> atm pvc 1 0 32 aal5snap
~> ~> !
~> ~> interface Ethernet1/0
~> ~> no ip address
~> ~> shutdown
~> ~> !
~> ~> interface Ethernet1/1
~> ~> no ip address
~> ~> shutdown
~> ~> !
~> ~> !
~> ~> ip classless
~> ~> ip http server
~> ~> !
~> ~> !
~> ~> map-list tor6
~> ~> ip 6.9.6.6 atm-vc 1 broadcast
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> line con 0
~> ~> logging synchronous
~> ~> transport input none
~> ~> line aux 0
~> ~> line vty 0 4
~> ~> !
~> ~> end
~> ~>
~> ~> r9#
~> ~>
~> ~>
~> ~>
~> ~> hostname r6
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> ip subnet-zero
~> ~> no ip finger
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> interface ATM0/0
~> ~> no ip address
~> ~> no atm ilmi-keepalive
~> ~> !
~> ~> interface ATM0/0.1 multipoint
~> ~> ip address 6.9.6.6 255.255.255.0
~> ~> map-group tor9
~> ~> atm pvc 1 0 32 aal5snap
~> ~> !
~> ~> interface Ethernet1/0
~> ~> no ip address
~> ~> shutdown
~> ~> !
~> ~> interface Serial1/0
~> ~> no ip address
~> ~> shutdown
~> ~> !
~> ~> !
~> ~> ip classless
~> ~> ip http server
~> ~> !
~> ~> !
~> ~> map-list tor9
~> ~> ip 6.9.6.9 atm-vc 1 broadcast
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> !
~> ~> line con 0
~> ~> logging synchronous
~> ~> transport input none
~> ~> line aux 0
~> ~> line vty 0 4
~> ~> !
~> ~> end
~> ~>
~> ~> r6#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:57 GMT-3