From: Paul Lalonde (plalonde2@xxxxxxxxx)
Date: Fri Mar 08 2002 - 13:16:06 GMT-3
Hi Guy,
Can you forward us the PVC list on the ATM switch? Make sure that the PVCs
that you've defined on the routers (0/32) is the same on the ATM switch.
Try a 'show atm pvc' or 'show atm map' on the LS1010. Also, check out:
http://www.cisco.com/warp/public/121/ipoveratm.html
and
http://www.cisco.com/warp/public/121/index.shtm
Hope this helps!
Paul
----- Original Message -----
From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
To: <ccielab@groupstudy.com>
Sent: Friday, March 08, 2002 10:20 AM
Subject: ATM Interface Setup
> I have some virtual rack time today, and it is my first time setting up
ATM.
> I am following a book that I have to set it up, I can't get it to work,
the
> interfaces are up but I can't ping the other side. There are 2 routers
> connected to an LS1010 ATM switch, I included the configs below, I would
> appreciate it if someone could tell me whether or not the configs are
> correct. The pvc for each router is 1, vpi 0 vci 32, thanks.
>
> hostname r9
> !
> !
> !
> !
> !
> !
> ip subnet-zero
> no ip finger
> !
> !
> !
> !
> !
> !
> !
> !
> interface ATM0/0
> no ip address
> no atm ilmi-keepalive
> !
> interface ATM0/0.1 multipoint
> ip address 6.9.6.9 255.255.255.0
> map-group tor6
> atm pvc 1 0 32 aal5snap
> !
> interface Ethernet1/0
> no ip address
> shutdown
> !
> interface Ethernet1/1
> no ip address
> shutdown
> !
> !
> ip classless
> ip http server
> !
> !
> map-list tor6
> ip 6.9.6.6 atm-vc 1 broadcast
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> line con 0
> logging synchronous
> transport input none
> line aux 0
> line vty 0 4
> !
> end
>
> r9#
>
>
>
> hostname r6
> !
> !
> !
> !
> !
> !
> ip subnet-zero
> no ip finger
> !
> !
> !
> !
> !
> !
> !
> !
> interface ATM0/0
> no ip address
> no atm ilmi-keepalive
> !
> interface ATM0/0.1 multipoint
> ip address 6.9.6.6 255.255.255.0
> map-group tor9
> atm pvc 1 0 32 aal5snap
> !
> interface Ethernet1/0
> no ip address
> shutdown
> !
> interface Serial1/0
> no ip address
> shutdown
> !
> !
> ip classless
> ip http server
> !
> !
> map-list tor9
> ip 6.9.6.9 atm-vc 1 broadcast
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> line con 0
> logging synchronous
> transport input none
> line aux 0
> line vty 0 4
> !
> end
>
> r6#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:57 GMT-3