From: Lupi, Guy (Guy.Lupi@xxxxxxxxxxxxx)
Date: Fri Mar 08 2002 - 13:00:07 GMT-3
I don't have access to the LS1010, so there is no way for me to verify the
setup unfortunately. It is on the IPExpert virtual rack.
~-----Original Message-----
~From: Paul Lalonde [mailto:plalonde2@cogeco.ca]
~Sent: Friday, March 08, 2002 11:16 AM
~To: Lupi, Guy; ccielab@groupstudy.com
~Subject: Re: ATM Interface Setup
~
~
~Hi Guy,
~
~Can you forward us the PVC list on the ATM switch? Make sure
~that the PVCs
~that you've defined on the routers (0/32) is the same on the
~ATM switch.
~
~Try a 'show atm pvc' or 'show atm map' on the LS1010. Also, check out:
~
~http://www.cisco.com/warp/public/121/ipoveratm.html
~
~and
~
~http://www.cisco.com/warp/public/121/index.shtm
~
~Hope this helps!
~
~Paul
~
~----- Original Message -----
~From: "Lupi, Guy" <Guy.Lupi@eurekaggn.com>
~To: <ccielab@groupstudy.com>
~Sent: Friday, March 08, 2002 10:20 AM
~Subject: ATM Interface Setup
~
~
~> I have some virtual rack time today, and it is my first time
~setting up
~ATM.
~> I am following a book that I have to set it up, I can't get
~it to work,
~the
~> interfaces are up but I can't ping the other side. There
~are 2 routers
~> connected to an LS1010 ATM switch, I included the configs
~below, I would
~> appreciate it if someone could tell me whether or not the configs are
~> correct. The pvc for each router is 1, vpi 0 vci 32, thanks.
~>
~> hostname r9
~> !
~> !
~> !
~> !
~> !
~> !
~> ip subnet-zero
~> no ip finger
~> !
~> !
~> !
~> !
~> !
~> !
~> !
~> !
~> interface ATM0/0
~> no ip address
~> no atm ilmi-keepalive
~> !
~> interface ATM0/0.1 multipoint
~> ip address 6.9.6.9 255.255.255.0
~> map-group tor6
~> atm pvc 1 0 32 aal5snap
~> !
~> interface Ethernet1/0
~> no ip address
~> shutdown
~> !
~> interface Ethernet1/1
~> no ip address
~> shutdown
~> !
~> !
~> ip classless
~> ip http server
~> !
~> !
~> map-list tor6
~> ip 6.9.6.6 atm-vc 1 broadcast
~> !
~> !
~> !
~> !
~> !
~> !
~> !
~> !
~> !
~> !
~> !
~> line con 0
~> logging synchronous
~> transport input none
~> line aux 0
~> line vty 0 4
~> !
~> end
~>
~> r9#
~>
~>
~>
~> hostname r6
~> !
~> !
~> !
~> !
~> !
~> !
~> ip subnet-zero
~> no ip finger
~> !
~> !
~> !
~> !
~> !
~> !
~> !
~> !
~> interface ATM0/0
~> no ip address
~> no atm ilmi-keepalive
~> !
~> interface ATM0/0.1 multipoint
~> ip address 6.9.6.6 255.255.255.0
~> map-group tor9
~> atm pvc 1 0 32 aal5snap
~> !
~> interface Ethernet1/0
~> no ip address
~> shutdown
~> !
~> interface Serial1/0
~> no ip address
~> shutdown
~> !
~> !
~> ip classless
~> ip http server
~> !
~> !
~> map-list tor9
~> ip 6.9.6.9 atm-vc 1 broadcast
~> !
~> !
~> !
~> !
~> !
~> !
~> !
~> !
~> !
~> !
~> !
~> line con 0
~> logging synchronous
~> transport input none
~> line aux 0
~> line vty 0 4
~> !
~> end
~>
~> r6#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:57 GMT-3