From: Williams, Glenn (WILLIAMSG@xxxxxxxxxxxxx)
Date: Fri Mar 08 2002 - 12:52:17 GMT-3
I had a problem similar. I put in the 16 0 16 ilmi and pvc
ilmi-pcv-discovery and learned my PVCs by show atm pvc. Still could not get
it to work when someone showed me I was set up for SVCs. Had to put in all
that NSAP, ESi stuff. Darned if I know now how I could have determined it
was SVC. Can someone tell me how?
GW
-----Original Message-----
From: Lupi, Guy [mailto:Guy.Lupi@eurekaggn.com]
Sent: Friday, March 08, 2002 9:20 AM
To: 'ccielab@groupstudy.com'
Subject: ATM Interface Setup
I have some virtual rack time today, and it is my first time setting up ATM.
I am following a book that I have to set it up, I can't get it to work, the
interfaces are up but I can't ping the other side. There are 2 routers
connected to an LS1010 ATM switch, I included the configs below, I would
appreciate it if someone could tell me whether or not the configs are
correct. The pvc for each router is 1, vpi 0 vci 32, thanks.
hostname r9
!
!
!
!
!
!
ip subnet-zero
no ip finger
!
!
!
!
!
!
!
!
interface ATM0/0
no ip address
no atm ilmi-keepalive
!
interface ATM0/0.1 multipoint
ip address 6.9.6.9 255.255.255.0
map-group tor6
atm pvc 1 0 32 aal5snap
!
interface Ethernet1/0
no ip address
shutdown
!
interface Ethernet1/1
no ip address
shutdown
!
!
ip classless
ip http server
!
!
map-list tor6
ip 6.9.6.6 atm-vc 1 broadcast
!
!
!
!
!
!
!
!
!
!
!
line con 0
logging synchronous
transport input none
line aux 0
line vty 0 4
!
end
r9#
hostname r6
!
!
!
!
!
!
ip subnet-zero
no ip finger
!
!
!
!
!
!
!
!
interface ATM0/0
no ip address
no atm ilmi-keepalive
!
interface ATM0/0.1 multipoint
ip address 6.9.6.6 255.255.255.0
map-group tor9
atm pvc 1 0 32 aal5snap
!
interface Ethernet1/0
no ip address
shutdown
!
interface Serial1/0
no ip address
shutdown
!
!
ip classless
ip http server
!
!
map-list tor9
ip 6.9.6.9 atm-vc 1 broadcast
!
!
!
!
!
!
!
!
!
!
!
line con 0
logging synchronous
transport input none
line aux 0
line vty 0 4
!
end
r6#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:57 GMT-3