From: Keith Steller (ksteller@xxxxxxxxxxxx)
Date: Fri Mar 08 2002 - 02:14:01 GMT-3
Hello all-
I am also swapping flash around in a couple 2514's, and have a set of Intel
and Cisco flash sticks. I managed to get the Intel flash working and the
code loaded. I am still unable to get the Cisco flash working. I get the
following error... Any ideas?? These flash sticks are supposed to be brand
new. TIA!
Source file name? c2500-is-l.112-21.bin
Destination file name [c2500-is-l.112-21.bin]?
Accessing file 'c2500-is-l.112-21.bin' on 192.168.1.100...
Loading c2500-is-l.112-21.bin from 192.168.1.100 (via Ethernet0): ! [OK]
Device needs erasure before copying new file
Erase flash device before writing? [confirm]
Copy 'c2500-is-l.112-21.bin' from server
as 'c2500-is-l.112-21.bin' into Flash WITH erase? [yes/no]y
Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erased
Loading c2500-is-l.112-21.bin from 192.168.1.100 (via Ethernet0): !
%Error: System flash write protected
%Error: System flash location 0x3000240 - wrote 0x48E7FFFC, read 0xFFFFFFFF
COPY: Image checksum verification failure
%Error: System flash write protected
%Error: System flash location 0x3000040 - wrote 0xE7FFFC , read 0xFFFFFFFF
TFTP from 192.168.1.100 failed/aborted
Verifying checksum... invalid (expected 0xABC5, computed 0x0)
%Error: System flash write protected
%Error: System flash location 0x3000000 - wrote 0xBAD00B1E, read 0xFFFFFFFF
Flash copy took 0:00:00 [hh:mm:ss]
r2(boot)#
r2(boot)#sh flash
System flash directory:
File Length Name/status
1 512 c2500-is-l.112-21.bin [invalid checksum]
[576 bytes used, 8388032 available, 8388608 total]
8192K bytes of processor board System flash (Read/Write)
r2(boot)#
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:56 GMT-3