From: Sundar Palaniappan (sundar_palaniappan@xxxxxxxxxxx)
Date: Thu Mar 07 2002 - 21:15:24 GMT-3
Change the config-register to 0x2101 and reload the router. Flash will show
as read/write. Upgrade the IOS and change the config-register back to
0x2102.
Cheers,
Sundar
>From: "Ludwig Morales" <morales_l@hotmail.com>
>Reply-To: "Ludwig Morales" <morales_l@hotmail.com>
>To: <ccielab@groupstudy.com>
>Subject: read only Flash
>Date: Thu, 7 Mar 2002 19:38:01 -0400
>
>Pie Chartshi everybody,
>
>one of my routers flash states to be "read only" how do i change this so
>that i can erase it and load another IOS
>
>cisco 2500 (68030) processor (revision L) with 14336K/2048K bytes of
>memory.
>Processor board ID 08319120, with hardware revision 00000000
>Bridging software.
>X.25 software, Version 3.0.0.
>1 Token Ring/IEEE 802.5 interface(s)
>2 Serial network interface(s)
>32K bytes of non-volatile configuration memory.
>16384K bytes of processor board System flash (Read ONLY)
>
>Configuration register is 0x2102
>
>
>regards,
>
>Ludwig
>
>[GroupStudy.com removed an attachment of type text/x-vcard which had a name
>of Ludwig A. Morales.vcf]
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:56 GMT-3