From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Wed Mar 06 2002 - 07:37:14 GMT-3
from CCO :
ip ospf authentication
To specify the authentication type for an interface, use the ip ospf
authentication interface configuration command. To remove the authentication
type for an interface, use the no form of this command.
ip ospf authentication [message-digest | null]
no ip ospf authentication
my source is :
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_r
/iprprt2/1rdospf.htm#xtocid796914
-Mamoor
----- Original Message -----
From: alain faure <alainfaure@yahoo.fr>
To: Ahmed Mamoor Amimi <mamoor@ieee.org>; <RSiddappa@NECBNS.com>;
<ccielab@groupstudy.com>
Sent: Wednesday, March 06, 2002 3:07 PM
Subject: Re: OSPF authentication.
> Hi,
>
> Really, i what version ?
> Maybe you have a link for it.
>
> Thank's
>
> Best regards
>
> --- Ahmed Mamoor Amimi <mamoor@ieee.org> a icrit : > Per interface
> authentication is introducted in new codes.
> > this helps when u want to a partial area of lets say for example area 0.
> > or u can autheticate 2 routers with different passwrod and 2 with
different.
> > this give u more control over security.
> >
> > -Mamoor
> >
> > ----- Original Message -----
> > From: <RSiddappa@NECBNS.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Wednesday, March 06, 2002 2:06 PM
> > Subject: OSPF authentication.
> >
> >
> > > Some one explain me
> > >
> > > what is the difference between per area authntication
> > >
> > > and
> > >
> > > Per interafce authnetication
> > >
> > > R.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:54 GMT-3