From: Chua, Parry (Parry.Chua@xxxxxxxxxx)
Date: Tue Mar 05 2002 - 06:59:48 GMT-3
How it is going ?
It is not clear about the setup on Cat3920 between R1 and R4, You mention it is
SRT on
3920. If SRT, then you may want to try to set it to SRB and you are doing SRBTL
B.
Next, it R1 and R4 connect to the same ring or just in a extended vlan (ring-br
idge-ring)?
You can debug at R4 when do testing to see what packet has send across..
Parry Chua
-----Original Message-----
From: Anand Ghody [mailto:vze2hq65@verizon.net]
Sent: Monday, March 04, 2002 1:18 AM
To: ccielab@groupstudy.com
Subject: translational bridging driving be nuts!!!
Alright, I have no idea why this is not working and need help. I
checked previous posts and made some adjustments but it still does not
work Need help!!!
heres the setup
r3 (e0, 172.16.3.2) -> catalyst 5505 port 2/2 -> catalyst 5505 port 2/1 ->
r4 (e0) -> r4 (to0) -> cat 3900 port 1 ->cat 3900 port 6 -> r1 (to0,
172.16.3.1)
I have disable ip routing on r4 and also setup bridge 1 bitswap-layer3
address
the ports on the cataylst 5500 are on the same vlan
the port on the cataylst 3900 are also in the same vlan and setup for srt
If I but an ip address on r4 token ring I can ping it from r1
I'll past the configs to make it easier
r3 config
!
interface Ethernet0
ip address 172.16.3.2 255.255.255.0
|
connnects to catalyst 5500
|
r4 config
no ip routing
no ip finger
!
!
source-bridge ring-group 100
source-bridge transparent 100 3 2 1
!
!
interface Ethernet0
no ip address
no ip route-cache
bridge-group 1
!
interface Serial0
no ip address
no ip route-cache
shutdown
!
interface Serial1
no ip address
no ip route-cache
shutdown
!
interface TokenRing0
no ip address
no ip route-cache
ring-speed 16
source-bridge 1 2 100
!
ip classless
no ip http server
!
bridge 1 protocol ieee
bridge 1 bitswap-layer3-addresses
!
|
connects to catalyst 3900
|
r1 config
!
interface TokenRing0
ip address 172.16.3.1 255.255.255.0
ring-speed 16
.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:53 GMT-3