From: Lupi, Guy (Guy.Lupi@xxxxxxxxxxxxx)
Date: Mon Mar 04 2002 - 16:53:20 GMT-3
Am I correct in stating that if you have a multipoint subinterface with no
frame-relay interface-dlci statements, only frame-relay map statements, and
you want to apply a different frame relay class to each dlci on that
subinterface, you must then put in "frame-relay interface-dlci" statements
so that you can apply the class to them? I just want to make sure that
there is no other way. I know that you can apply one class to the
subinterface, but I am wondering about when you have multiple dlci's on the
same subinterface that are each going to follow a different class. I put a
config below, if I am doing something wrong please tell me. For the
map-classes I am following the guidelines that are in CCIE Practical Studies
Vol. 1. Thanks as always.
interface Serial0
no ip address
encapsulation frame-relay
no fair-queue
frame-relay traffic-shaping
!
interface Serial0.1 multipoint
ip address 10.1.11.14 255.255.255.0
ip ospf network broadcast
ipx network 1401
no arp frame-relay
frame-relay map ipx 1401.0008.de6c.6382 101 broadcast
frame-relay map ip 10.1.11.1 102 broadcast
frame-relay map ip 10.1.11.3 101 broadcast
frame-relay map ipx 1401.0010.7b80.e936 102 broadcast
frame-relay interface-dlci 101
class tor3
frame-relay interface-dlci 102
class tor1
no frame-relay inverse-arp
!
interface Serial0.2 point-to-point
ip address 10.1.12.193 255.255.255.240
ip router isis
ipx network 1402
no arp frame-relay
frame-relay interface-dlci 100
class tor2
!
map-class frame-relay tor1 (remote router circuit speed 500000)
frame-relay cir 1300000 (local router circuit speed)
frame-relay bc 62500 (remote router speed/8)
frame-relay be in 56000 (placed automatically)
frame-relay be out 500000 (set to remote router port speed)
frame-relay mincir 512000 (set to actual cir of the local
circuit)
frame-relay adaptive-shaping becn (makes router respond to becn's)
frame-relay custom-queue-list 1 (applies custom queueing)
!
map-class frame-relay tor2 (remote router circuit speed 128000)
frame-relay cir 1300000
frame-relay bc 16000
frame-relay be in 56000
frame-relay be out 128000
frame-relay mincir 512000
frame-relay adaptive-shaping becn
frame-relay custom-queue-list 1
!
map-class frame-relay tor3 (remote router circuit speed 64000)
frame-relay cir 1300000
frame-relay bc 8000
frame-relay be in 56000
frame-relay be out 64000
frame-relay mincir 512000
frame-relay adaptive-shaping becn
frame-relay custom-queue-list 1
!
queue-list 1 protocol ipx 1
queue-list 1 protocol ip 2
queue-list 1 default 3
queue-list 1 queue 1 byte-count 1000
queue-list 1 queue 2 byte-count 2000
queue-list 1 queue 3 byte-count 1000
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:52 GMT-3