From: JOSE ANGEL MARTINEZ DE LA VARA (jamartinez@xxxxxxxxxxxxxxxx)
Date: Mon Mar 04 2002 - 11:28:01 GMT-3
Hi,
Yes, you are completely right. I also think you could see the inverseARP
requests being sent using 'debug frame packet'. But it would be more usefull
to see if IARP is enabled even when the DLCI is deleted or inactive. I do
not know it that can be seen anywhere else but 'show run'. Perhaps we could
use the command 'sh frame traffic', but that one gives you total statistics
about all DLCI (not one by one).
Jose Angel
-----Mensaje original-----
De: Ludwig Morales [mailto:morales_l@hotmail.com]
Enviado el: lunes, 04 de marzo de 2002 13:14
Para: ccielab@groupstudy.com
Asunto: Re: Frame Relay InvARP
Hi
How about debugging IP Packets, wont you see arp request packets being send
from your peers if you do that? way you know the remote router has ARP
enable.
Regards,
Ludwig
----- Original Message -----
From: "JOSE ANGEL MARTINEZ DE LA VARA" <jamartinez@landata.payma.es>
To: "'Tarek Sabry'" <tsabry@houston.sns.slb.com>; "'Michael Kilpatrick'"
<mjkilpat@yahoo.com>; <ccielab@groupstudy.com>
Sent: Monday, March 04, 2002 5:28 AM
Subject: RE: Frame Relay InvARP
> Well, I cannot agree with you entirely. With that command you will see if
> your peer is running InverseARP. I mean, when you get the dynamic entry
that
> could come from your request or from your peer's request. If both FR peers
> have dynamic entries, then you can be sure InverseARP is enabled. If not,
> you cannot know who is IARP enabled and who is not (if you just look at 's
> fr map').
>
> You need show run (or perhaps a command I've never heard about).
>
> Cheers
>
> Jose Angel
>
> -----Mensaje original-----
> De: Tarek Sabry [mailto:tsabry@houston.sns.slb.com]
> Enviado el: lunes, 04 de marzo de 2002 07:03
> Para: 'Michael Kilpatrick'; ccielab@groupstudy.com
> Asunto: RE: Frame Relay InvARP
>
>
> sh frame map will tell you if static or dynamic mapping is in effect.
>
> Tarek
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Michael Kilpatrick
> Sent: Sunday, March 03, 2002 10:51 PM
> To: ccielab@groupstudy.com
> Subject: Frame Relay InvARP
>
>
> Is there a show command (besides sh run) to tell you if InverseARP is
> enabled
> on an interface?
> Thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:52 GMT-3