From: A Yigit Zorlu (alec_cisco@xxxxxxxxx)
Date: Sat Mar 02 2002 - 09:24:39 GMT-3
Garry,
can you pls post the configs. Have you tried local policy and/or policy on
the interface ??
Yigit
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of garry
baker
Sent: Saturday, March 02, 2002 9:45 AM
To: ccielab@groupstudy.com
Subject: policy routing and ip nexy-hop
Guys,
I have run into a problem with policy routing and ip
next hop. i have a frame network that is not fully
meshed and i am only allowed one fame map statement.
so to get full connectivity I need to polciy route so
that anything destined for the router that i don'thave
a pvc for should go via another pvc.
what i have done is set a some policy routing that
says:
route-map next-hop permit 10
match ip next hop 1
set ip next-hop 64.108.4.4
access-list 1 permit 64.108.4.3
i activate this route map on the appropriate
interfaces and also local policy routing. my problem
is that everything is matching this policy route even
networks that i am trying to get to that are directly
connected are taking the long route thanks to the
route map. I know i must be doing something silly
here. i have a router talking igrp to this router that
loses all it igrp routes from this policy routed box
when the internal policy routing is turned on. Can
someone help me with this???
Garry
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:51 GMT-3