From: Przemyslaw Karwasiecki (karwas@xxxxxxxxxxx)
Date: Fri Feb 22 2002 - 20:47:21 GMT-3
On DTE interface you can use "ignore dcd".
This, together with "no keepalive" will keep
interface up/up regardles of anything.
But, there is still open question how to force
interface into DTE mode, while DCE/DTE detection
i based on connected cable.
My $0.002
Przemek
On Fri, 2002-02-22 at 17:21, Tim Szigeti wrote:
> interesting question (Global Knowledge ACPC 2 - Prep Lab 1 - 1.2f):
>
> f) on R6 configure its serial 1 interface to be in the UP/UP state even
> though its not connected.
>
>
> this is easy with an ethernet (no keep) - but what's the trick for a
> serial?
>
> please let me know if you do.
>
> -tim
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:31 GMT-3