From: MADMAN (dmadlan@xxxxxxxxx)
Date: Thu Feb 21 2002 - 17:01:51 GMT-3
As far as I can remember I have always had to redistribute static with
rip. Same with EIGRP.
Dave
Tshon wrote:
>
> George I am not able to confirm in any other ios, but I have received
> the same.
>
> George Spahl wrote:
>
> >Greetings,
> >
> >I've long been under the impression that by simply adding a static 0/0
> >route that RIP would automatically include it in outgoing routing
> >updates, however I'm only able to make that happen by "redistributing
> >static". (Default information originate works fine also). I've reduced
> >it to a very simple config but get the same results. Also, the network
> >that the 0/0 route points to is in RIP as well (if that makes a
> >difference. Has the behavior changed for this (or maybe never behaved
> >this way at all)? Version is 12.1. Didn't expect to get hung up on IP
> >RIP...
> >
> >George
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:29 GMT-3