From: Sandro Ciffali (sandyccie@xxxxxxxxx)
Date: Thu Feb 21 2002 - 10:39:09 GMT-3
Check out table map command in doyle vol. 2, he
clearly mentions that this command can be used with
any routing protocol that supports route taggging, ie,
rip version 2, eigrp , isis or ospf. tHe example he
has given is using ospf.
Sandro
--- "Chua, Parry" <Parry.Chua@compaq.com> wrote:
> I read the TCP/IP vol I by Jeff D, it infact pointed
> out that in EIGRP
> packet, TLV field
> has indicate the type of external route learn, ie
> 0x09 is BGP. But no
> external route type information learn by OSPF record
> in any where in
> this book. Could be I am missing something...
>
> Parry Chua
>
> -----Original Message-----
> From: Sandro Ciffali [mailto:sandyccie@yahoo.com]
> Sent: Thursday, February 21, 2002 1:01 PM
> To: ccielab@groupstudy.com
> Subject: Fwd: BGP table map update
>
>
> Note: forwarded message attached.
> I tried the exact same thing, With the only
> difference
> that this time instead of using eigrp i used ospf,
>
> Now on R4 the route which were originaly ? now shows
> up as e and the route which were originaly i shows
> up
> correctly.
>
> However this is definatly encouraging than eigrp
> behaviour where nothing was working. My version of
> code are as follows
> R1 11.2 (17)
> R2 12.0 (9)
> R3 12.1.9
> R4 12.0 (15)
> R5 12.1.9
>
> Sandro
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:29 GMT-3