Has anyone seen the error message below from ISDN...?

From: Craig Thomas Elrod (celrod@xxxxxxxxx)
Date: Thu Feb 21 2002 - 00:58:45 GMT-3


   
r3isdn#
00:06:35: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BRI0/0, TEI 89 changed
to down
00:06:35: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0, TEI 89 changed
to down
00:06:35: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BRI0/0, TEI 90 changed
to down
00:06:35: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR0/0, TEI 90 changed
to down
00:06:37: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0, TEI 93 changed to up
00:06:38: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0, TEI 95 changed to up
00:06:173971879836: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
00:06:41: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
00:06:176093659136: %LINK-3-UPDOWN: Interface BRI0/0:2, changed state to up
00:06:176093659802: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected
to r5isdn
00:06:42: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed
state to up
00:06:42: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1,
changed state to up
00:06:42: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:2, changed
state to up
r3isdn#
r3isdn#sh isdn st
Global ISDN Switchtype = basic-ni
ISDN BRI0/0 interface
         dsl 0, interface ISDN Switchtype = basic-ni
     Layer 1 Status:
         ACTIVE
     Layer 2 Status:
         TEI = 93, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
         TEI = 95, Ces = 2, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
         TEI 93, ces = 1, state = 5(init)
             spid1 configured, spid1 sent, spid1 valid
             Endpoint ID Info: epsf = 0, usid = 2, tid = 1
         TEI 95, ces = 2, state = 5(init)
             spid2 configured, spid2 sent, spid2 valid
             Endpoint ID Info: epsf = 0, usid = 4, tid = 1
     Layer 3 Status:
         2 Active Layer 3 Call(s)
         CCB:callid=B, sapi=0, ces=1, B-chan=1, calltype=DATA
         CCB:callid=C, sapi=0, ces=1, B-chan=2, calltype=DATA
     Active dsl 0 CCBs = 2
     The Free Channel Mask: 0x80000000
  --More--
00:06:47: %ISDN-6-CONNECT: Interface BRI0/0:2 is now connected Total
Allocated ISDN CCBs = 2
r3isdn#
00:07:8652863978: %ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected
from r5isdn, call lasted 21
seconds
00:07:8589934592: %ISDN-6-DISCONNECT: Interface BRI0/0:2 disconnected
from r5isdn, call lasted 20
seconds
00:07:02: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down
00:07:02: %LINK-3-UPDOWN: Interface BRI0/0:2, changed state to down
00:07:03: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed
state to down
00:07:03: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:2, changed
state to down
00:07:03: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1,
changed state to down
00:07:17179869192: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up
00:07:04: ISDN ERROR: Module-CCBRI Function-_SetNewChan Error-Cannot get
an idle channel from cha
n mgt. Data- 0, 2
00:07:05: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state to up
00:07:06: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed
state to up
00:07:06: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1,
changed state to up
00:07:10: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to r5isdn
00:07:35: ISDN ERROR: Module-CCBRI Function-_SetNewChan Error-Cannot get
an idle channel from cha
n mgt. Data- 0, 2
00:07:38: ISDN ERROR: Module-CCBRI Function-_SetNewChan Error-Cannot get
an idle channel from cha
n mgt. Data- 0, 2

[GroupStudy.com removed an attachment of type application/zip which had a name
of r3r5err.zip"; x-mac-type="705A4950"; x-mac-creator="705A4950]
Craig Thomas Elrod, ccnp, ccdp
Mobile Wireless Group
Cisco Systems, Inc., http://mobile.cisco.com
VoIP:+1.408.853.9776 GSM:+1.408.823.0315
"~Mobilizing the Internet~"



This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:29 GMT-3