From: Wu, Sean (sean.wu@xxxxxxxxxxxxxx)
Date: Wed Feb 20 2002 - 23:39:28 GMT-3
Hi, Guys,
Question about Aux port back-to-back connection to simulate ISDN DDR
Below is a list of urls about aux b2b info.
http://www.cisco.com/warp/public/793/access_dial/auxback.html
I used the sample config, but it didn't work
http://www.cisco.com/warp/public/471/mod-aux-dialout.html
http://www.groupstudy.com/archives/ccielab/200201/msg00998.html
http://www.groupstudy.com/archives/ccielab/200201/msg00997.html
This config works great expect that only allows one way call, i.e, you can
only ping
from r1 to r3, not r3 to r1 in order to bring up the circuit.
the modem type under "line aux 0" is a magic. I wonder if we have to use
"host" in one end and the other end "dialin". Apparently, when I use "modem
inout" on both ends, it won't work.
Any comments or working config examples?
thanks.
Sean Wu
**************************************************************************
The information transmitted herewith is sensitive information intended only
for use by the individual or entity to which it is addressed. If the reader
of this message is not the intended recipient, you are hereby notified that
any review, retransmission, dissemination, distribution, copying or other
use of, or taking of any action in reliance upon this information is
strictly prohibited. If you have received this communication in error,
please contact the sender and delete the material from your computer.
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:29 GMT-3