From: Ahmed Mamoor Amimi (mamoor@xxxxxxxx)
Date: Wed Feb 20 2002 - 17:10:05 GMT-3
Quote for CCO :
"The Cisco IOS software supports the IPXWAN protocol, as defined in RFC
1634. IPXWAN allows a router that is running IPX routing to connect via a
serial link to another router, possibly from another manufacturer, that is
also routing IPX and using IPXWAN.
IPXWAN is a connection startup protocol. Once a link has been established,
IPXWAN incurs little or no overhead.
You can use the IPXWAN protocol over PPP. You can also use it over HDLC;
however, the devices at both ends of the serial link must be Cisco routers."
from :
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/atip
x_c/ipx/2cdipx.htm
-Mamoor
----- Original Message -----
From: kenairs <kenairs@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, February 20, 2002 11:14 PM
Subject: nlsp - ipx wan
> Hi group ,
> The question ask you configure IPX NLSP between 2 serial interface of 2
> routers..
> Does that means that we have to use IPX wan for the serial interface ?
> Tks
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:28 GMT-3