From: Christopher M. Heffner (cheffner@xxxxxxxxxxxxxxxxxx)
Date: Sun Feb 17 2002 - 02:02:54 GMT-3
This is exactly what you want on all your routers if you have to upgrade.
If you look all 4 chips are in bank 1 which really means slot 0.
Remember there are 4 flash chips per flash simm hence you have a single 8 mb fl
ash simm in your router right now.
So now you need to purchase one more 8 mb flash simm for each router that looks
like this.
By the way Cisco does not support 2 mb flash simms on 2500 routers. Only 4 mb
simms which means then they would have been 1024KB per chip or 8 mb simms whic
h would be 2048K per chip which is what you have.
Let me know if you need anything else.
===============================================================================
===
Christopher M. Heffner
IMCR Course Director
Certified Cisco Systems Instructor
CCSI, CCIE, MCT, MCSE, MCNI, MCNE, CLI, PCLP, FCSE, ASE, CTT, A+
cheffner@certified-labs.net
-----Original Message-----
From: Ludwig Morales [mailto:morales_l@hotmail.com]
Sent: Saturday, February 16, 2002 11:51 PM
To: Christopher M. Heffner
Subject: Re: Rotuers R/F
It' seems I'm doomed :)
8192K bytes of processor board System flash (Read ONLY)
Chip Bank Code Size Name
1 1 89A0 2048KB INTEL 28F016SA
2 1 89A0 2048KB INTEL 28F016SA
3 1 89A0 2048KB INTEL 28F016SA
4 1 89A0 2048KB INTEL 28F016SA
Executing current image from System flash
this is the output of show flash chip on almost all my routers, so i'll have
to buy 8Meg Flash chips right?
Any one interested in 2megs :)
regards
Ludwig
----- Original Message -----
From: "Christopher M. Heffner" <cheffner@certified-labs.net>
To: "Ludwig Morales" <morales_l@hotmail.com>; <ccielab@groupstudy.com>
Sent: Saturday, February 16, 2002 10:24 PM
Subject: RE: Rotuers R/F
> Depends upon the router models that you have ... if you have 2500 series
> models then it still depends (an instructor's favorite answer to a
> student's question) because you could have 1 - 8mb flash module right
> now in which case you would need to purchase 1 more 8 mb flash memory
> module or you could have 2 - 4mb flash modules instead then in that case
> you would have to purchase two - 8 mb flash modules. Do a "show flash
> chips" or "show flash all" and the IOS will tell you what you have or
> just open the router. In case of the dram memory, again in a 2500, you
> must purchase a 16mb 72-pin 36-bit parity FPM 80ns memory module. You
> will find plenty of both on ebay.
>
> If you have another model then the 2500, let me know and I will be happy
> to help you out.
>
> ========================================================================
> ==========
> Christopher M. Heffner
> Installation and Maintanence of Cisco Routers (IMCR) Course Director
> Certified Cisco Systems Instructor
> CCSI, CCIE, MCT, MCSE, MCNI, MCNE, CLI, PCLP, FCSE, ASE, CTT, A+
> cheffner@certified-labs.net
>
>
>
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Ludwig Morales
> Sent: Saturday, February 16, 2002 5:33 PM
> To: ccielab@groupstudy.com
> Subject: Rotuers R/F
>
>
> Hi Everybody.
>
> I'm in the middle of upgrading my routers (to load enterprise software
> =
> on them) most of them have 8 Flash / 8 Ram my target is 16/16 can I do =
> this by buying an extra 8meg ram/flash I haven't deal with hardware on =
> this equipment yet.
>
>
> Thanks=20
>
> Ludwig
>
> [GroupStudy.com removed an attachment of type text/x-vcard which had a
> name of Ludwig A. Morales.vcf]
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:25 GMT-3