From: Jeremy Laurenson \(Cisco\) (jlaurens@xxxxxxxxx)
Date: Sat Feb 16 2002 - 20:14:18 GMT-3
RE: Dialer WatchHere ya go:
Topology:
o loop22 222.222.222.5
|
|
(R5) (R1)
| \ /
| \ /
| [FRAME-RELAY]
| |
[isdn] |
| (r2)
| |
(r3)--------+-------(r6)-----[atm]---(r7)
|
|
(r4)
jlaurensR3#
jlaurensR3#show ip ro
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 192.168.201.2 to network 0.0.0.0
222.222.222.0/32 is subnetted, 6 subnets
O 222.222.222.6 [110/11] via 192.168.201.6, 00:46:18, Ethernet0
O IA 222.222.222.7 [110/12] via 192.168.201.6, 00:46:10, Ethernet0
O IA 222.222.222.5 [110/59] via 192.168.201.2, 00:46:15, Ethernet0
O IA 222.222.222.2 [110/11] via 192.168.201.2, 00:46:15, Ethernet0
C 222.222.222.3 is directly connected, Loopback22
O IA 222.222.222.1 [110/59] via 192.168.201.2, 00:46:15, Ethernet0
172.16.0.0/16 is variably subnetted, 8 subnets, 3 masks
C 172.16.34.4/32 is directly connected, Serial0
C 172.16.34.0/26 is directly connected, Serial0
C 172.16.35.0/24 is directly connected, Dialer0
O IA 172.16.125.1/32 [110/58] via 192.168.201.2, 00:46:16, Ethernet0
O IA 172.16.125.2/32 [110/10] via 192.168.201.2, 00:46:16, Ethernet0
O IA 172.16.125.5/32 [110/58] via 192.168.201.2, 00:46:18, Ethernet0
O IA 172.16.67.7/32 [110/11] via 192.168.201.6, 00:46:13, Ethernet0
O IA 172.16.67.6/32 [110/10] via 192.168.201.6, 00:46:13, Ethernet0
R 150.100.0.0/16 [120/1] via 172.16.34.4, 00:00:22, Serial0
O*E2 0.0.0.0/0 [110/1] via 192.168.201.2, 00:46:11, Ethernet0
C 192.168.200.0/23 is directly connected, Ethernet0
jlaurensR3#sh isdn stat b0 | include Call
0 Active Layer 3 Call(s)
jlaurensR3#
termserv>5
[Resuming connection 5 to r5 ... ]
jlaurensR5#show ip ro
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 172.16.125.2 to network 0.0.0.0
222.222.222.0/32 is subnetted, 6 subnets
O IA 222.222.222.6 [110/59] via 172.16.125.2, 00:46:39, Serial0/0
O IA 222.222.222.7 [110/60] via 172.16.125.2, 00:46:39, Serial0/0
C 222.222.222.5 is directly connected, Loopback22
O 222.222.222.2 [110/49] via 172.16.125.2, 00:46:39, Serial0/0
O IA 222.222.222.3 [110/59] via 172.16.125.2, 00:46:39, Serial0/0
O 222.222.222.1 [110/97] via 172.16.125.2, 00:46:39, Serial0/0
172.16.0.0/16 is variably subnetted, 8 subnets, 3 masks
O E1 172.16.34.4/32 [110/78] via 172.16.125.2, 00:46:40, Serial0/0
O E1 172.16.34.0/26 [110/78] via 172.16.125.2, 00:46:40, Serial0/0
C 172.16.35.0/24 is directly connected, Dialer0
O 172.16.125.1/32 [110/96] via 172.16.125.2, 00:46:40, Serial0/0
C 172.16.125.0/24 is directly connected, Serial0/0
O 172.16.125.2/32 [110/48] via 172.16.125.2, 00:46:42, Serial0/0
O IA 172.16.67.7/32 [110/59] via 172.16.125.2, 00:46:42, Serial0/0
O IA 172.16.67.6/32 [110/58] via 172.16.125.2, 00:46:42, Serial0/0
O E1 150.100.0.0/16 [110/78] via 172.16.125.2, 00:20:57, Serial0/0
O*E2 0.0.0.0/0 [110/1] via 172.16.125.2, 00:46:42, Serial0/0
O IA 192.168.200.0/23 [110/58] via 172.16.125.2, 00:46:42, Serial0/0
jlaurensR5#sh int s0/0
Serial0/0 is up, line protocol is up
Hardware is QUICC Serial
Internet address is 172.16.125.5/24
MTU 1500 bytes, BW 2048 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY, loopback not set
Keepalive set (10 sec)
LMI enq sent 6909, LMI stat recvd 6909, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 1023 LMI type is CISCO frame relay DTE
FR SVC disabled, LAPF state down
Broadcast queue 0/64, broadcasts sent/dropped 4494/0, interface broadcasts
225
1
Last input 00:00:09, output 00:00:09, output hang never
Last clearing of "show interface" counters 19:22:31
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/1/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
9772 packets input, 339946 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
1 input errors, 0 CRC, 1 frame, 0 overrun, 0 ignored, 0 abort
11929 packets output, 466734 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 output buffer failures, 0 output buffers swapped out
2 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
jlaurensR5#sh ip int brief
Interface IP-Address OK? Method Status
Prot
ocol
Ethernet0/0 unassigned YES NVRAM up
up
Serial0/0 172.16.125.5 YES NVRAM up
up
BRI0/0 unassigned YES NVRAM up
up
BRI0/0:1 unassigned YES unset down
down
BRI0/0:2 unassigned YES unset down
down
Ethernet0/1 unassigned YES NVRAM administratively down
down
Dialer0 172.16.35.5 YES manual up
up
Loopback22 222.222.222.5 YES NVRAM up
up
jlaurensR5#conf t
Enter configuration commands, one per line. End with CNTL/Z.
jlaurensR5(config)#int s0/0
jlaurensR5(config-if)#shut
jlaurensR5(config-if)#^Z
jlaurensR5#
19:22:59: %OSPF-5-ADJCHG: Process 1, Nbr 222.222.222.2 on Serial0/0 from
FULL to
DOWN, Neighbor Down: Interface down or detached
19:23:00: %SYS-5-CONFIG_I: Configured from console by console
19:23:01: %LINK-5-CHANGED: Interface Serial0/0, changed state to
administrativel
y down
19:23:02: %LINEPROTO-5-
termserv>2
[Resuming connection 2 to r2 ... ]
jlaurensR2#show ip ospf neigh
Neighbor ID Pri State Dead Time Address Interface
222.222.222.6 0 FULL/DROTHER 00:00:32 192.168.201.6
Ethernet0/0
222.222.222.3 0 FULL/DROTHER 00:00:39 192.168.201.3
Ethernet0/0
222.222.222.1 1 FULL/ - 00:01:32 172.16.125.1
Serial0/0.1
222.222.222.5 1 FULL/ - 00:01:44 172.16.125.5
Serial0/0.1
jlaurensR2#show ip ospf neigh
Neighbor ID Pri State Dead Time Address Interface
222.222.222.6 0 FULL/DROTHER 00:00:39 192.168.201.6
Ethernet0/0
222.222.222.3 0 FULL/DROTHER 00:00:35 192.168.201.3
Ethernet0/0
222.222.222.1 1 FULL/ - 00:01:49 172.16.125.1
Serial0/0.1
222.222.222.5 1 FULL/ - 00:01:30 172.16.125.5
Serial0/0.1
jlaurensR2#! Wait for the route to fail...
jlaurensR2#show ip ospf neigh
Neighbor ID Pri State Dead Time Address Interface
222.222.222.6 0 FULL/DROTHER 00:00:32 192.168.201.6
Ethernet0/0
222.222.222.3 0 FULL/DROTHER 00:00:38 192.168.201.3
Ethernet0/0
222.222.222.1 1 FULL/ - 00:01:52 172.16.125.1
Serial0/0.1
222.222.222.5 1 FULL/ - 00:01:04 172.16.125.5
Serial0/0.1
jlaurensR2#show ip ospf neigh
Neighbor ID Pri State Dead Time Address Interface
222.222.222.6 0 FULL/DROTHER 00:00:30 192.168.201.6
Ethernet0/0
222.222.222.3 0 FULL/DROTHER 00:00:37 192.168.201.3
Ethernet0/0
222.222.222.1 1 FULL/ - 00:01:30 172.16.125.1
Serial0/0.1
222.222.222.5 1 FULL/ - 00:00:42 172.16.125.5
Serial0/0.1
jlaurensR2#deb ip ospf eve
OSPF events debugging is on
jlaurensR2#
00:50:09: OSPF: Rcv hello from 222.222.222.3 area 236 from Ethernet0/0
192.168.2
01.3
00:50:09: OSPF: End of hello processing
00:50:13: OSPF: Rcv hello from 222.222.222.6 area 236 from Ethernet0/0
192.168.2
01.6
00:50:13: OSPF: End of hello processing
00:50:14: OSPF: Rcv hello from 222.222.222.6 area 0 from OSPF_VL0
192.168.201.6
00:50:14: OSPF: End of hello processing
00:50:19: OSPF: Rcv hello from 222.222.222.3 area 236 from Ethernet0/0
192.168.2
01.3
00:50:19: OSPF: End of hello processing
00:50:23: OSPF: Rcv hello from 222.222.222.1 area 0 from Serial0/0.1
172.16.125.
1
00:50:23: OSPF: End of hello processing
00:50:23: OSPF: Rcv hello from 222.222.222.6 area 236 from Ethernet0/0
192.168.2
01.6
00:50:23: OSPF: End of hello processing
00:50:24: OSPF: Rcv hello from 222.222.222.6 area 0 from OSPF_VL0
192.168.201.6
00:50:24: OSPF: End of hello processing
00:50:29: OSPF: Rcv hello from 222.222.222.3 area 236 from Ethernet0/0
192.168.2
01.3
00:50:29: OSPF: End of hello processing
00:50:33: OSPF: Rcv hello from 222.222.222.6 area 236 from Ethernet0/0
192.168.2
01.6
00:50:33: OSPF: End of hello processing
00:50:34: OSPF: Rcv hello from 222.222.222.6 area 0 from OSPF_VL0
192.168.201.6
00:50:34: OSPF: End of hello processing
00:50:35: OSPF: 222.222.222.5 address 172.16.125.5 on Serial0/0.1 is dead
00:50:35: %OSPF-5-ADJCHG: Process 1, Nbr 222.222.222.5 on Serial0/0.1 from
FULL
to DOWN, Neighbor Down: Dead timer expired
jlaurensR2#u all
All possible debugging has been turned off
jlaurensR2#
termserv>3
[Resuming connection 3 to r3 ... ]
19:file Di0
jlaurensR3#
19:23:53: BR0:1 DDR: dialer protocol up
jlaurensR3#
19:23:54: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed
state
to up
jlaurensR3#sho
19:23:59: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to 5625927256
jlaur
ensR5
jlaurensR3#show dialer
BRI0 - dialer type = ISDN
Dial String Successes Failures Last DNIS Last status
0 incoming call(s) have been screened.
0 incoming call(s) rejected for callback.
BRI0:1 - dialer type = ISDN
Idle timer (30 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is data link layer up
Dial reason: Dialing on watched route loss
Interface bound to profile Di0
Time until disconnect 13 secs
Current call connected 00:00:16
Connected to 5625927256 (jlaurensR5)
BRI0:2 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is idle
BRI1 - dialer type = ISDN
Dial String Successes Failures Last DNIS Last status
0 incoming call(s) have been screened.
0 incoming call(s) rejected for callback.
BRI1:1 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is shutdown
BRI1:2 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is shutdown
BRI2 - dialer type = ISDN
Dial String Successes Failures Last DNIS Last status
0 incoming call(s) have been screened.
0 incoming call(s) rejected for callback.
BRI2:1 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is shutdown
BRI2:2 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is shutdown
BRI3 - dialer type = ISDN
Dial String Successes Failures Last DNIS Last status
0 incoming call(s) have been screened.
0 incoming call(s) rejected for callback.
BRI3:1 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is shutdown
BRI3:2 - dialer type = ISDN
Idle timer (120 secs), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is shutdown
jlaurensR3#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 192.168.201.2 to network 0.0.0.0
222.222.222.0/32 is subnetted, 6 subnets
O 222.222.222.6 [110/11] via 192.168.201.6, 00:49:47, Ethernet0
O IA 222.222.222.7 [110/12] via 192.168.201.6, 00:49:40, Ethernet0
D 222.222.222.5 [111/46354176] via 172.16.35.5, 00:00:25, Dialer0
O IA 222.222.222.2 [110/11] via 192.168.201.2, 00:49:45, Ethernet0
C 222.222.222.3 is directly connected, Loopback22
O IA 222.222.222.1 [110/59] via 192.168.201.2, 00:49:45, Ethernet0
172.16.0.0/16 is variably subnetted, 8 subnets, 3 masks
C 172.16.35.5/32 is directly connected, Dialer0
C 172.16.34.4/32 is directly connected, Serial0
C 172.16.34.0/26 is directly connected, Serial0
C 172.16.35.0/24 is directly connected, Dialer0
O IA 172.16.125.1/32 [110/58] via 192.168.201.2, 00:49:46, Ethernet0
--More--
19:24:23: BR0:1 DDR: idle timeout
19:24:23: DDR: Dialer Watch: watch-group = 1
19:24:23: DDR: network 222.222.222.5/255.255.255.255 UP,
19:24:23: DDR: primary DOWN
O IA 172.16.125.2/32 [110/10] via 192.168.201.2, 00:49:50, Ethernet0
O IA 172.16.67.7/32 [110/11] via 192.168.201.6, 00:49:45, Ethernet0
O IA 172.16.67.6/32 [110/10] via 192.168.201.6, 00:49:45, Ethernet0
R 150.100.0.0/16 [120/1] via 172.16.34.4, 00:00:18, Serial0
O*E2 0.0.0.0/0 [110/1] via 192.168.201.2, 00:49:42, Ethernet0
C 192.168.200.0/23 is directly connected, Ethernet0
jlaurensR3#ping 222.222.222.5
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 222.222.222.5, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 36/36/36 ms
jlaurensR3#
termserv>2
[Resuming connection 2 to r2 ... ]
00:5
jlaurensR2#show ip ro
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 172.16.125.1 to network 0.0.0.0
222.222.222.0/32 is subnetted, 6 subnets
O 222.222.222.6 [110/11] via 192.168.201.6, 00:49:08, Ethernet0/0
O IA 222.222.222.7 [110/12] via 192.168.201.6, 00:01:01, Ethernet0/0
O E2 222.222.222.5 [110/20] via 192.168.201.3, 00:00:56, Ethernet0/0
C 222.222.222.2 is directly connected, Loopback22
O 222.222.222.3 [110/11] via 192.168.201.3, 00:49:08, Ethernet0/0
O 222.222.222.1 [110/49] via 172.16.125.1, 00:01:01, Serial0/0.1
C 192.168.210.0/24 is directly connected, TokenRing0/0
172.16.0.0/16 is variably subnetted, 8 subnets, 3 masks
O E2 172.16.35.5/32 [110/20] via 192.168.201.3, 00:01:01, Ethernet0/0
O E1 172.16.34.4/32 [110/30] via 192.168.201.3, 00:01:02, Ethernet0/0
O E1 172.16.34.0/26 [110/30] via 192.168.201.3, 00:01:02, Ethernet0/0
O E2 172.16.35.0/24 [110/20] via 192.168.201.3, 00:01:02, Ethernet0/0
O 172.16.125.1/32 [110/48] via 172.16.125.1, 00:01:04, Serial0/0.1
C 172.16.125.0/24 is directly connected, Serial0/0.1
O IA 172.16.67.7/32 [110/11] via 192.168.201.6, 00:01:04, Ethernet0/0
O IA 172.16.67.6/32 [110/10] via 192.168.201.6, 00:01:04, Ethernet0/0
O E1 150.100.0.0/16 [110/30] via 192.168.201.3, 00:01:04, Ethernet0/0
O*E2 0.0.0.0/0 [110/1] via 172.16.125.1, 00:01:04, Serial0/0.1
C 192.168.200.0/23 is directly connected, Ethernet0/0
jlaurensR2#
termserv>5
[Resuming connection 5 to r5 ... ]
UPDOWN: Line protocol on Interface Serial0/0, changed state to down
jlaurensR5#conf t
Enter configuration commands, one per line. End with CNTL/Z.
jlaurensR5(config)#int s0/0
jlaurensR5(config-if)#no shut
jlaurensR5(config-if)#^Z
jlaurensR5#
19:
termserv>3
[Resuming connection 3 to r3 ... ]
1
jlaurensR3#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 192.168.201.2 to network 0.0.0.0
222.222.222.0/32 is subnetted, 6 subnets
O 222.222.222.6 [110/11] via 192.168.201.6, 00:50:44, Ethernet0
O IA 222.222.222.7 [110/12] via 192.168.201.6, 00:50:37, Ethernet0
D 222.222.222.5 [111/46354176] via 172.16.35.5, 00:01:21, Dialer0
O IA 222.222.222.2 [110/11] via 192.168.201.2, 00:50:42, Ethernet0
C 222.222.222.3 is directly connected, Loopback22
O IA 222.222.222.1 [110/59] via 192.168.201.2, 00:50:42, Ethernet0
172.16.0.0/16 is variably subnetted, 8 subnets, 3 masks
C 172.16.35.5/32 is directly connected, Dialer0
C 172.16.34.4/32 is directly connected, Serial0
C 172.16.34.0/26 is directly connected, Serial0
C 172.16.35.0/24 is directly connected, Dialer0
O IA 172.16.125.1/32 [110/58] via 192.168.201.2, 00:50:43, Ethernet0
O IA 172.16.125.2/32 [110/10] via 192.168.201.2, 00:50:44, Ethernet0
O IA 172.16.67.7/32 [110/11] via 192.168.201.6, 00:50:39, Ethernet0
O IA 172.16.67.6/32 [110/10] via 192.168.201.6, 00:50:39, Ethernet0
R 150.100.0.0/16 [120/1] via 172.16.34.4, 00:00:15, Serial0
O*E2 0.0.0.0/0 [110/1] via 192.168.201.2, 00:50:37, Ethernet0
C 192.168.200.0/23 is directly connected, Ethernet0
jlaurensR3#
19:25:37: BR0:1 DDR: idle timeout
19:25:37: DDR: Dialer Watch: watch-group = 1
19:25:37: DDR: network 222.222.222.5/255.255.255.255 UP,
19:25:37: DDR: primary DOWN
jlaurensR3#! wait for ospf route to come in - then primary will be up
jlaurensR3#
19:25:57: DDR: Dialer Watch: watch-group = 1
19:25:57: DDR: network 222.222.222.5/255.255.255.255 UP,
19:25:57: DDR: primary DOWN
19:25:57: DDR: Dialer Watch: Dial Reason: Primary of group 1 DOWN
19:25:57: DDR: Dialer Watch: watch-group = 1,
jlaurensR3#
19:26:07: BR0:1 DDR: idle timeout
19:26:07: DDR: Dialer Watch: watch-group = 1
19:26:07: DDR: network 222.222.222.5/255.255.255.255 UP,
19:26:07: DDR: primary UP
19:26:07: BR0 DDR: has total 0 call(s), dial_out 0, dial_in 0
19:26:07: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile Di0
19:26:07: BR0:1 DDR: disconnecting call
19:26:07: BR0:1 DDR: Dialer Watch: resetting call in progress
19:26:07: DDR: Dialer Watch: watch-group = 1
19:26:07: DDR: network 222.222.222.5/255.255.255.255 UP,
19:26:07: DDR: primary UP
19:26:07: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from 5625927256
jla
urensR5, call lasted 134 seconds
19:26:07: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
jlaurensR3#
19:26:07: BR0:1 DDR: disconnecting call
jlaurensR3#
19:26:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed
state
to down
jlaurensR3#u all
All possible debugging has been turned off
-----Original Message-----
From: RSiddappa@NECBNS.com [mailto:RSiddappa@NECBNS.com]
Sent: Saturday, February 16, 2002 2:34 PM
To: jlaurens@cisco.com
Subject: RE: Dialer Watch
Can explain me how is it working. My concern is once the observed route
diappers from the routing table, what happens. If possible pls send me the
routing table out puts also.
Thanks,
Rajeev.
-----Original Message-----
From: Jeremy Laurenson (Cisco) [mailto:jlaurens@cisco.com]
Sent: Saturday, February 16, 2002 4:09 PM
To: ccielab@groupstudy.com; Siddappa, Rajeev
Subject: RE: Dialer Watch
R3 dials R5 on route to 222.222.222.5 going away
jlaurensR3#wr t
Building configuration...
Current configuration : 3184 bytes
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname jlaurensR3
!
enable secret 5 $1$tVeb$SdBkOiRwR.IOvdml6idoT0
!
username EAST password 0 cisco
username all
username jlaurensR5 password 0 cisco
!
!
!
!
ip subnet-zero
no ip domain-lookup
!
isdn switch-type basic-ni
!
!
!
!
!
interface Loopback22
ip address 222.222.222.3 255.255.255.255
!
interface Ethernet0
ip address 192.168.201.3 255.255.254.0
ip ospf priority 0
media-type 10BaseT
!
interface Ethernet1
no ip address
shutdown
media-type 10BaseT
!
interface Serial0
ip address 172.16.34.3 255.255.255.192
encapsulation ppp
no fair-queue
ppp authentication chap
ppp chap hostname HQ
ppp chap refuse
!
interface Serial1
no ip address
shutdown
!
interface BRI0
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 56259272540101 5927254
isdn spid2 56259272550101 5927255
ppp authentication chap
!
interface BRI1
no ip address
shutdown
isdn switch-type basic-ni
!
interface BRI2
no ip address
shutdown
isdn switch-type basic-ni
!
interface BRI3
no ip address
shutdown
isdn switch-type basic-ni
!
interface BRI4
no ip address
shutdown
isdn switch-type basic-ni
!
interface BRI5
no ip address
shutdown
isdn switch-type basic-ni
!
interface BRI6
no ip address
shutdown
isdn switch-type basic-ni
!
interface BRI7
no ip address
shutdown
isdn switch-type basic-ni
!
interface Dialer0
ip address 172.16.35.3 255.255.255.0
encapsulation ppp
dialer pool 1
dialer idle-timeout 30
dialer string 5625927256
dialer caller 5625927256
dialer watch-group 1
dialer-group 1
ppp authentication chap
!
router eigrp 1
redistribute ospf 1 route-map ONLYDEFAULT
network 172.16.35.0 0.0.0.255
default-metric 512 1000 255 128 1500
distance eigrp 111 111
auto-summary
no eigrp log-neighbor-changes
!
router ospf 1
log-adjacency-changes
redistribute rip metric-type 1 subnets route-map RIP-TO-OSPF
redistribute eigrp 1 subnets route-map FROMBACKUP
network 192.168.201.3 0.0.0.0 area 236
network 222.222.222.3 0.0.0.0 area 236
!
router rip
redistribute ospf 1 metric 3
passive-interface BRI0
passive-interface Dialer0
passive-interface Ethernet0
passive-interface Serial1
network 172.16.0.0
distribute-list 1 out Serial0
no auto-summary
!
ip classless
no ip http server
!
access-list 1 deny 172.16.34.0 0.0.0.255
access-list 1 permit any
access-list 2 permit any
access-list 10 permit 0.0.0.0
access-list 20 permit 222.222.222.0 0.0.0.255
access-list 20 permit 172.16.35.0 0.0.0.255
access-list 100 deny eigrp any any
access-list 100 permit ip any any
dialer watch-list 1 ip 222.222.222.5 255.255.255.255
dialer-list 1 protocol ip list 100
route-map FROMBACKUP permit 10
match ip address 20
!
route-map OSPF-TO-RIP permit 10
match ip address 1
!
route-map RIP-TO-OSPF permit 10
match ip address 2
!
route-map ONLYDEFAULT permit 10
match ip address 10
!
!
alias exec ship show ip route
alias exec clip clear ip route *
alias exec ospfn show ip ospf neigh
alias exec ipin show ip int brief
!
line con 0
exec-timeout 0 0
logging synchronous
line aux 0
line vty 0 4
login
!
end
jlaurensR5#wr t
Building configuration...
Current configuration : 1720 bytes
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname jlaurensR5
!
enable secret 5 $1$ABmB$qaU36lXE/1E6nWmruMKOt1
!
username jlaurensR3 password 0 cisco
!
!
!
!
ip subnet-zero
no ip domain-lookup
!
isdn switch-type basic-ni
!
!
!
!
voice-port 1/0/0
!
voice-port 1/0/1
!
voice-port 1/1/0
!
voice-port 1/1/1
!
!
!
!
interface Loopback22
ip address 222.222.222.5 255.255.255.255
!
interface Ethernet0/0
no ip address
!
interface Serial0/0
ip address 172.16.125.5 255.255.255.0
encapsulation frame-relay
ip ospf network point-to-multipoint
frame-relay map ip 172.16.125.1 101 broadcast
frame-relay map ip 172.16.125.2 101 broadcast
frame-relay lmi-type cisco
!
interface BRI0/0
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 56259272560101 5927256
isdn spid2 56259272570101 5927257
ppp authentication chap
!
interface Ethernet0/1
no ip address
shutdown
!
interface Dialer0
ip address 172.16.35.5 255.255.255.0
encapsulation ppp
dialer pool 1
dialer remote-name jlaurensR3
dialer-group 1
ppp authentication chap
!
router eigrp 1
network 172.16.35.0 0.0.0.255
network 222.222.222.5 0.0.0.0
auto-summary
no eigrp log-neighbor-changes
!
router ospf 1
log-adjacency-changes
network 172.16.125.5 0.0.0.0 area 0
network 222.222.222.5 0.0.0.0 area 0
!
ip classless
ip http server
!
access-list 100 deny eigrp any any
access-list 100 permit ip any any
dialer-list 1 protocol ip list 100
!
!
alias exec ship show ip route
alias exec clip clear ip route *
alias exec ospfn show ip ospf neigh
alias exec ipin show ip int brief
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
login
!
end
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
RSiddappa@NECBNS.com
Sent: Saturday, February 16, 2002 1:48 PM
To: jlaurens@cisco.com; ssowell@gate.net; Guy.Lupi@eurekaggn.com;
ccielab@groupstudy.com
Subject: RE: Dialer Watch
I beg to see the config pls.
I am working on my 12.0(8).
R.
-----Original Message-----
From: Jeremy Laurenson (Cisco) [mailto:jlaurens@cisco.com]
Sent: Saturday, February 16, 2002 3:40 PM
To: Siddappa, Rajeev; ssowell@gate.net; Guy.Lupi@eurekaggn.com;
ccielab@groupstudy.com
Subject: RE: Dialer Watch
I beg to differ - I have dialer-watch running on dialer profiles in my lab
here. IOS12.1.11
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
RSiddappa@NECBNS.com
Sent: Saturday, February 16, 2002 11:03 AM
To: ssowell@gate.net; Guy.Lupi@eurekaggn.com; ccielab@groupstudy.com
Subject: RE: Dialer Watch
And it is not possible to use Dialer Wacth on Dialer profile, but u can
use
dialer rotary group to configure the Dialer watch if u do not want to
configure some thing on the physical interface.
R.
-----Original Message-----
From: Steven M. Sowell [mailto:ssowell@gate.net]
Sent: Friday, February 15, 2002 4:21 PM
To: Lupi, Guy; Ccielab@Groupstudy. Com
Subject: RE: Dialer Watch
With legacy DDR, you need to ensure that you add an additional dialer-map
statement with an IP address that matches one of your watched networks.
For
instance....
interface BRI0/0
ip address 10.1.220.18 255.255.255.252
dialer map ip 10.1.220.17 name R2 broadcast 5551110
dialer watch-group 1
dialer map ip 10.1.195.1 name R2 broadcast 5551110
dialer watch-list 1 ip 10.1.195.1 255.255.255.255
Notice above that I have my "real" dialer map to the peer BRI IP address,
and I've added another dialer map that matches EXACTLY one of the watched
routes. Dialer profiles do not have this requirement (because you use
"dialer string" instead of "dialer map")
Steven Sowell
CCIE#7317
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Lupi, Guy
Sent: Friday, February 15, 2002 2:39 PM
To: 'ccielab@groupstudy.com'
Subject: Dialer Watch
I am using dialer watch with EIGRP. I have the standard deny eigrp any
any,
then permit ip any any in the access list that the dialer list references.
Without a floating static route, I can only get it to come up when I
attempt
to ping the far side of the ISDN connection, with a floating static I can
get it to come up with any IP, as it is supposed to. My question is, is
there any way to get the backup to come up without using the floating
static? I don't think there is, but if anyone could help me out here that
would be great, thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:25 GMT-3