RE: Output on MC3810

From: Chuck Church (cchurch@xxxxxxxxxxxx)
Date: Sat Feb 16 2002 - 10:33:47 GMT-3

• Next message: Howard C. Berkowitz: "Re: How route redistribution EXACTLY works (followup)"
• Previous message: Asbjorn Hojmark: "RE: Permitting specific prefixes in BGP [Solution]"
• Maybe in reply to: M. Nabelsi: "Output on MC3810"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Just a wild guess, but I think the image on there doesn't support the voice
cards, or is the wrong image for that router. Try a different/correct
image, or pull out the voice cards.

Chuck

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
M. Nabelsi
Sent: Friday, February 15, 2002 11:58 PM
To: ccielab@groupstudy.com
Subject: Output on MC3810

Hi all,

I just got an MC3810, just powered it up. After about 3 minutes I am
getting an output:

can not find voice IDB
can not find voice IDB
can not find voice IDB
can not find voice IDB
can not find voice IDB
can not find voice IDB
can not find voice IDB
can not find voice IDB
can not find voice IDB
can not find voice IDB
can not find voice IDB
can not find voice IDB
can not find voice IDB
can not find voice IDB

It does not stop. It does not let me enter any commands. Any Idea is
greatly appreciated!
Thanks in advance!

• Next message: Howard C. Berkowitz: "Re: How route redistribution EXACTLY works (followup)"
• Previous message: Asbjorn Hojmark: "RE: Permitting specific prefixes in BGP [Solution]"
• Maybe in reply to: M. Nabelsi: "Output on MC3810"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:24 GMT-3