Re: Custom-Queueing and Frame-relay?

From: DAN DORTON (DHSTS68@xxxxxxxxxxxxxxx)
Date: Thu Feb 14 2002 - 11:30:34 GMT-3

• Next message: Bob Sinclair: "OSPF External routes in Database, not table"
• Previous message: CHRIS HUGO: "Re: Simulate NetBEUI traffic"
• Maybe in reply to: Shadi: "Custom-Queueing and Frame-relay?"
• Next in thread: Shadi: "Re: Custom-Queueing and Frame-relay?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
You cannot apply custom queing to the interface if you also have
frame-relay traffic shaping enabled on it.

Chances are you will have FRTS enabled.

The best way to do it is to use map-class to define the FRTS & add the
custom queing to the FRTS map-class.

Then apply the FRTS map-class to the DLCI's individually.

>>> "Shadi" <ccie@investorsgrp.com> 02/14/02 03:12AM >>>
Hi all,

If you would like to use Custom-Queueing with Frame-relay?

Do you apply the custom-queue-list command dirctly on an interface
configured
for frame-relay encapsulation or inside frame-relay map statement?

What is the difference?

Shadi

• Next message: Bob Sinclair: "OSPF External routes in Database, not table"
• Previous message: CHRIS HUGO: "Re: Simulate NetBEUI traffic"
• Maybe in reply to: Shadi: "Custom-Queueing and Frame-relay?"
• Next in thread: Shadi: "Re: Custom-Queueing and Frame-relay?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:22 GMT-3