From: tang bing (tang_bing@xxxxxxxxx)
Date: Thu Feb 14 2002 - 01:14:21 GMT-3
be careful about this command .
save config first !
r6#csim start 222
csim: called number = 222, loop count = 1 ping count =
0
=== Flushing messages (00:01:43 UTC Mon Mar 1 1993)
===
Queued messages
*** System received a SegV exception ***
signal= 0xb, code= 0x1100, context= 0x819e0458
PC = 0x0, Vector = 0x1100, SP = 0x82094e18
System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE
(fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
--- Jim Brown <Jim.Brown@CaseLogic.com> wrote:
> Csim start "number"
>
> -----Original Message-----
> From: Wojtek Iwanczyk [mailto:wiwanczyk@tec-adv.com]
>
> Sent: Monday, February 04, 2002 11:04 AM
> To: ccielab@groupstudy.com
> Subject: VOIP manual dial
>
>
> I have seen this posted here before, but can not
> find it in the archives ..
> Im looking for the undocumented command that allows
> to dial a voip/pots peer
> manually from the console, without the use of an
> analog or IP phone.
> any help would be appreciated ...
> Best Regards,
> Wojtek Iwanczyk
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:22 GMT-3