From: Williams, Glenn (WILLIAMSG@xxxxxxxxxxxxx)
Date: Wed Feb 13 2002 - 15:00:58 GMT-3
Yeah. It sounds true. You would have an ip on all routers and you don't
need to bridge cross the middle one, so why need IRB?
GW
-----Original Message-----
From: Mike Pervere [mailto:Mike@pervere.net]
Sent: Wednesday, February 13, 2002 11:55 AM
To: Williams, Glenn
Cc: ccielab@groupstudy.com
Subject: RE: IRB
If you didn't have an IP address on the BVI, then you're presumably not
trying to route IP (to that bridge group), in which case you wouldn't need a
BVI, because you wouldn't need to do IRB, because you weren't trying to
route to a bridge group... Did I follow that right -- I think I confused
myself there...
Basically, unless you needed to assign an IP address to the bridge group,
wouldn't it be easier to just bag IRB altogether?
Mike
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Williams, Glenn
Sent: Wednesday, February 13, 2002 12:10 PM
To: 'ccielab@groupstudy.com'
Subject: IRB
Can someone tell me when I do and do not need an ip address on the BVI
interface when doing IRB.
TIA
GW
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:21 GMT-3