From: Boris Bertelsons (cciers@xxxxxxxxxxxxx)
Date: Tue Feb 12 2002 - 09:56:12 GMT-3
Hi Jeff !
You CAN NOT use the WIC-1ENET in a 2600er chassis.
At least not till today, I hope they'll support it in future.
You can find more information regarding this on the link below:
http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi
Kind regards,
Boris Bertelsons
CCDP, CCIE #6373
---------- Original Message ----------------------------------
From: "Jeff K." <Jeffbk@austin.rr.com>
Reply-To: "Jeff K." <Jeffbk@austin.rr.com>
Date: Mon, 11 Feb 2002 15:52:41 -0600
>If this isn't a possibility in an upcoming rev of code, I can always add a
>second physical Ethernet interface, which leads me to my next question. I
>know that I can add the NM-1E module, but I am curious is anyone knows if the
>WIC-1ENET module will work in this thing. I've found some hardware notes
>under the 2600's, but they really seem to talk just about the 1700 series
>routers and it never really explicitly mentions that this module works in on
>the 2600 / 3600 series
>(http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/hw_in
>st/wic_inst/wic_doc/wanlan.htm#xtocid6 -- watch the wrap). The WIC-1ENET
>would be a much cheaper option than the NM-1E.
>
>Thanks in advance,
>
>-Jeff, CCIE # 8007
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:20 GMT-3