From: yuen me (yuen_me@xxxxxxxxxxx)
Date: Sun Feb 10 2002 - 03:09:58 GMT-3
R3 is receiving sap update from NLSP. I try to filter out the SAP at r3
where NLSP is redistributed into eigrp so that all eigrp routers should not
see the sap. I cannot do it with the following command: Why ?
ipx router nlsp
area-address 600 FFFFFF00
redistribute eigrp 123
ipx router eigrp 123
redistribute nlsp
distribute-sap-list 1000 out nlsp
network 123
access-list 1000 deny FFFFFFFF 0 r5_fs
access-list 1000 permit FFFFFFFF 0
r3#sh ipx server
Codes: S - Static, P - Periodic, E - EIGRP, N - NLSP, H - Holddown, + =
detail
U - Per-user static
1 Total IPX Servers
Table ordering is based on routing and server info
Type Name Net Address Port Route Hops
Itf
N 4 r5_fs 555.0051.0051.0051:0451 2/01 2
Tu0
Of course, if I change to "distribute-sap-list 1000 out s0" then it works.
Your insight is appreciated.
Yuenme
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:18 GMT-3