From: M Patel (m.p@xxxxxxxxxxxx)
Date: Sun Feb 10 2002 - 11:23:29 GMT-3
If R3, R4 and R5 support frame-relay inverse-arp then each router
should automatically find out the remote address for each
PVC. Therefore, connectivity between R3 to R4 and R3 to R5, should be
possible.
In order to tell R4 how to get R5, frame-relay map statments will be
required on R4 and vice cersa for R5.
Regards,
M Patel
On Sun, 10 Feb 2002, [euc-kr] sherry huies wrote:
> Hi, all
> i have one question about frame-relay.
> on diagram, R3 is connected to frame-relay switch.
> R4 and R5 is also connected to frame-relay switch.
>
> Suppose that we can't use sub-interface command
> on R3 ,how can i do this situation?
>
> R3 DLCI 304,305
> R4 DLCI 403
> R5 DLCI 503
> ===============================================
> 403 = R4
> =
> =
> 304 =
> R3----------==
> 305 =
> =
> =
> 503 = R5
>
>
> thanks in advance.
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:18 GMT-3