From: roy bustos (roybustos@xxxxxxxxxxx)
Date: Sun Feb 10 2002 - 08:10:42 GMT-3
route must be classfull and check your routing table.
Read:
http://www.cisco.com/warp/public/105/default.html
Roy
----- Original Message -----
From: "Nirav Kumar" <nirav_sing@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, February 09, 2002 10:32 PM
Subject: DEFAULT ROUTING WITH EIGRP USING THE ip- default network command
> A few days back I passed CCIE written with 90 %. It
> feels great !
>
> Now need some help on the lab portion from the Cisco
> gurus !!
>
>
> I am refrerring to Solie book for lab.
>
> On page : 708, Heading : Default routing with EIGRP,
>
> Redistribute a default static route into EIGRP so
> that EIGRP recognizes the route of 0.0.0.0 to be the
> default route. A default static route is created with
> the global router entry ip route 0.0.0.0.0.0.0.0
> next_hop_IP_address. This route then must be
> redistributed into EIGRP with the redistribute static
> command.
>
> Am able to sucessfully configure this.
>
> BUT
>
> If the network 0.0.0.0 is not used, you can still
> mark the route as a default route by using the ip
> default network a.b.c.d command. but using the
> deafault network command, it does not work.
>
>
> Any ideas, how to make this work?, what specifically
> do you need to do to get this to work ?
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:18 GMT-3