Re: OSPF NSSA Problem

From: Jun Qian (johnjunqian@xxxxxxxxx)
Date: Thu Feb 07 2002 - 21:59:04 GMT-3

• Next message: ssowell@xxxxxxxx: "FW: Re: BitSwapper"
• Previous message: Alex Rhyubisef: "RE: hello......igrp-ospf(mutual-redistribution) problem"
• Maybe in reply to: martin abelli: "OSPF NSSA Problem"
• Next in thread: Dan Lockwood: "RE: OSPF NSSA Problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I think that you change R2 configuration.

area 1 stub default --> area 1 nssa default

--- martin abelli <jamescollia@yahoo.co.kr> wrote:
> Hi All,
> I am just working on OSPF NSSA lab. I am having a
> problem of injecting default route in to NSSA area
> and
> injecting N2 routes from NSSA area to back bone. The
> config is as below:
> R1(s0)--------(s0)R2(e0)------------(e0)R3
>
> R1
>
> int s0
> ip add 12.1.1.4 255.255.255.0
>
> ip route 25.25.25.0 255.255.255.0 nul 0
>
> router ospf 1
> red stat sub
> net 12.1.1.4 0.0.0.0 area 1
> area 1 nssa
>
> R2
>
> int s0
> ip add 12.1.1.16 255.255.255.0
>
> int e0
> ip add 10.3.1.16 255.255.255.0
>
> router ospf 1
> summ 25.25.25.0 255.255.255.0 ( I also tried
> 25.25.0.0 255.255.0.0)
> net 12.1.1.0 0.0.0.255 area 1
> net 10.3.1.0 0.0.0.255 area 0
> area 1 stub default
>
> R2
>
> int e0
> ip add 10.3.1.17 255.255.255.0
> router ospf 1
> net 10.3.1.0 0.0.0.255 area 0
>
> In router 3 I cant see 25.25 network and R1 I can't
> see default network.
> Any suggestions please?
> Regards
>
>

• Next message: ssowell@xxxxxxxx: "FW: Re: BitSwapper"
• Previous message: Alex Rhyubisef: "RE: hello......igrp-ospf(mutual-redistribution) problem"
• Maybe in reply to: martin abelli: "OSPF NSSA Problem"
• Next in thread: Dan Lockwood: "RE: OSPF NSSA Problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:15 GMT-3