From: Alex Rhyubisef (foselkr@xxxxxxxxxxx)
Date: Thu Feb 07 2002 - 21:58:16 GMT-3
Hi Chua.
My R5's interface is f0/0 and R6 is f0/1.10.
and both router's igrp timer is in the same value.
R5#sh ip protocols
Routing Protocol is "igrp 10"
Sending updates every 90 seconds, next due in 61
seconds
Invalid after 270 seconds, hold down 280, flushed
after 630
Outgoing update filter list for all interfaces is
Incoming update filter list for all interfaces is
Default networks flagged in outgoing updates
Default networks accepted from incoming updates
IGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
IGRP maximum hopcount 100
IGRP maximum metric variance 1
Redistributing: igrp 10
Routing for Networks:
175.3.0.0
Routing Information Sources:
Gateway Distance Last Update
175.3.56.6 100 00:00:29
Distance: (default is 100)
R6#sh ip protocols
Routing Protocol is "igrp 10"
Sending updates every 90 seconds, next due in 84
seconds
Invalid after 270 seconds, hold down 280, flushed
after 630
Outgoing update filter list for all interfaces is
Incoming update filter list for all interfaces is
Default networks flagged in outgoing updates
Default networks accepted from incoming updates
IGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
IGRP maximum hopcount 100
IGRP maximum metric variance 1
Redistributing: ospf 1 (internal, external 1 & 2,
nssa-external 1 & 2) Redistributing: igrp 10
Routing for Networks:
175.3.0.0
Passive Interface(s):
FastEthernet0/0
Serial0/0
Routing Information Sources:
Gateway Distance Last Update
175.3.56.5 100 08:13:47
Distance: (default is 100)
--- "Chua, Parry" <Parry.Chua@compaq.com> wrote: >
> If your R5 and R6 interconnect is f0/0, why your R6
> f0/0 is passive ? It
> will not send IGRP
> update to R5.
>
> Parry Chua
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:15 GMT-3