From: Binh Co ONG (ongbinhco@xxxxxxxxxxx)
Date: Thu Feb 07 2002 - 15:31:42 GMT-3
Just an idea...
On R2 instead of area 1 stub default
Try this : area 1 nssa default-i
Binh Co
>From: martin abelli <jamescollia@yahoo.co.kr>
>Reply-To: martin abelli <jamescollia@yahoo.co.kr>
>To: ccielab@groupstudy.com
>Subject: OSPF NSSA Problem
>Date: Thu, 7 Feb 2002 21:22:10 +0900 (JST)
>
>Hi All,
>I am just working on OSPF NSSA lab. I am having a
>problem of injecting default route in to NSSA area and
>injecting N2 routes from NSSA area to back bone. The
>config is as below:
>R1(s0)--------(s0)R2(e0)------------(e0)R3
>
>R1
>
>int s0
>ip add 12.1.1.4 255.255.255.0
>
>ip route 25.25.25.0 255.255.255.0 nul 0
>
>router ospf 1
>red stat sub
>net 12.1.1.4 0.0.0.0 area 1
>area 1 nssa
>
>R2
>
>int s0
>ip add 12.1.1.16 255.255.255.0
>
>int e0
>ip add 10.3.1.16 255.255.255.0
>
>router ospf 1
>summ 25.25.25.0 255.255.255.0 ( I also tried
>25.25.0.0 255.255.0.0)
>net 12.1.1.0 0.0.0.255 area 1
>net 10.3.1.0 0.0.0.255 area 0
>area 1 stub default
>
>R2
>
>int e0
>ip add 10.3.1.17 255.255.255.0
>router ospf 1
>net 10.3.1.0 0.0.0.255 area 0
>
>In router 3 I cant see 25.25 network and R1 I can't
>see default network.
>Any suggestions please?
>Regards
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:14 GMT-3