From: Mannan Venkatesan (mv_lab@xxxxxxxxxxx)
Date: Wed Feb 06 2002 - 04:57:17 GMT-3
Normally, you would have problem with 'ipx eigrp nei' because of frame
mappings. But you can ping the remote, then it should be ok. Configs and 'sh
fram map' can help.
Mannan
----- Original Message -----
From: "kenairs" <kenairs@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, February 06, 2002 2:08 AM
Subject: IPX eigrp over FR
> Hi,
> Below is my setup..
>
> R1
> | |
> | |
> | |
> R2 R3
>
>
> R1 , R2 and R3 are connected over FR . R1 is the hub and R2 and R3 is the
> spoke.
> I configured R1 with 2 p-t-p subinterfaces and R2 and R3 with physical
> interface.
>
> R1 - R2 is one subnet. R1 and R3 is one subnet.
>
> I then disable IPX RIP and enable IPX eigrp over the FR.
> ipx
> But i can seem to form any ipx eigrp nei between R1-R2 and R1-R3. I try to
> ping ipx from R1 to R2 and R1 to R3 and both are successfully.
>
> Please help.
> Tks
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:12 GMT-3