Fw: IPX eigrp over FR

From: kenairs (kenairs@xxxxxxxxxxx)
Date: Wed Feb 06 2002 - 04:26:15 GMT-3

• Next message: Jaeheon Yoo: "Re: Undocumented iBGP Behavior (Confirmed by Cisco)"
• Previous message: Lab Candidate: "IPX over HSRP"
• Maybe in reply to: kenairs: "IPX eigrp over FR"
• Next in thread: Mannan Venkatesan: "Re: IPX eigrp over FR"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Hi,
Below is my setup..

        R1
         | |
        | |
       | |
    R2 R3

R1 , R2 and R3 are connected over FR . R1 is the hub and R2 and R3 is the
spoke.
I configured R1 with 2 p-t-p subinterfaces and R2 and R3 with physical
interface.

R1 - R2 is one subnet. R1 and R3 is one subnet.

I then disable IPX RIP and enable IPX eigrp over the FR.
 ipx
But i can seem to form any ipx eigrp nei between R1-R2 and R1-R3. I try to
ping ipx from R1 to R2 and R1 to R3 and both are successfully.

Please help.
Tks

• Next message: Jaeheon Yoo: "Re: Undocumented iBGP Behavior (Confirmed by Cisco)"
• Previous message: Lab Candidate: "IPX over HSRP"
• Maybe in reply to: kenairs: "IPX eigrp over FR"
• Next in thread: Mannan Venkatesan: "Re: IPX eigrp over FR"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:12 GMT-3