From: Rob Rummel (Rummel@xxxxxxxxxxxxx)
Date: Mon Feb 04 2002 - 04:00:27 GMT-3
It means that is a specific part and not part of a whole configuration.
Example would be if you're ordering a 2611 router and part of that
config would be a wic-1T
But if you were to only order a Wic-1t you would need the = sign if your
ordering direct from Cisco
Wic-1T=
Rob Rummel
-Ethernet (n): something used to catch the etherbunny-
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Christian C. Aguillo
Sent: Sunday, February 03, 2002 8:13 PM
To: ccielab@groupstudy.com
Subject: Cisco Part number Question
Hi Friends,
What is the meaning of the "=" equal sign at the end of the part number
in
Cisco Products?
Thanks for the help....
Cheers....
Chris
----- Original Message -----
From: "Chua, Parry" <Parry.Chua@compaq.com>
To: "garry baker" <fallow46@yahoo.com>; <ccielab@groupstudy.com>
Sent: Monday, February 04, 2002 8:04 AM
Subject: RE: hsrp and ospf neighbours
> Could it be the mac address changes after implementon of HSRP, try
> "standby use-bia" option
> and verify the result.
>
> Parry Chua
>
> -----Original Message-----
> From: garry baker [mailto:fallow46@yahoo.com]
> Sent: Monday, February 04, 2002 12:34 PM
> To: ccielab@groupstudy.com
> Subject: hsrp and ospf neighbours
>
>
> Guys,
>
> I have just configured hsrp on two routers. I am
> running ospf on the same interfaces. Once i configured
> the hsrp i lost my ospf neighbours. I have tried
> different newtrok types but still no avail. Does
> anyone know of an issue with this.
>
> Garry
>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:11 GMT-3