From: armreg@xxxxxxxxxxxx
Date: Sat Feb 02 2002 - 00:20:43 GMT-3
Bob,
Thank you. I forgot to set the ip route default.
Thanks
Antonio.
"Bob Sinclair" <bsin@erols.com> wrote:
>I don't know that lab, but things to check would be:
>
>1. is sc0 in the right vlan? set int sc0 2 2.2.2.2/24 would put the switc
h ip address 2.2.2.2 in vlan 2
>
>
>2. If the switch can ping in its vlan but not out, then you check the switch
default gateway: sh int sc0
>
>set ip route default 2.2.2.1
>----- Original Message -----
>From: <armreg@netscape.net>
>To: <ccielab@groupstudy.com>
>Sent: Friday, February 01, 2002 6:11 PM
>Subject: CCIEbootcamp Lab 16V2
>
>
>> Hello
>>
>> I have been working on lab 16v2, and I am having some troubles when I tried
to ping the ip address of the SCO for the catalyst ( 172.25.10.254)from R1 or R
6. I do not have any problem when I tried to ping any other ip addresses in th
e same subnet. Does somebody recall having this issue?
>>
>> Thanks
>>
>> Antonio
>> --
>>
>>
>>
>>
This archive was generated by hypermail 2.1.4 : Thu Jun 20 2002 - 13:46:10 GMT-3