From: Brad Ellis (bellis@xxxxxxxxxxxxxx)
Date: Sun Jan 13 2002 - 00:31:16 GMT-3
You need an NM-1v or NM-2v in order to use the VIC-2FXS in a 2600 series
router. You should be able to use an NM-1V, you probably do not need to
spend the extra money on a 2V for a home lab.
thanks,
-Brad Ellis
CCIE#5796 (R&S / Security)
Network Learning Inc
bellis@optsys.net
used Cisco gear: www.optsys.net
CCIE Labs, racks, and classes: http://www.ccbootcamp.com/quicklinks.html
----- Original Message -----
From: "Frank Kim" <frank@comegetus.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, January 12, 2002 10:09 PM
Subject: Question on VIC-2FXS for 2600/3600 series routers
> Folks,
> I'm trying to do some basic VOIP labs. Before I run out and buy all the
> VOIP gears, I have a few questions:
>
>
> 1) Can VIC-2FXS modules be inserted into a WIC slots on a 2600
> series router? Or it requires a NM-2V?
> 2) That's all I can think of now. If you have tips, please send
> them over. Thanks.
>
>
>
>
> -Frank
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:26 GMT-3